Euchner

 

euchner_logo

 

all_products2

 

 

 

 

 

Plug Connectors

EUCHNER Plug Connectors are offered in both Metal and Plastic versions. They are suitable for use in control and instrumentation circuits. Many versions are available to fit your needs. Plug connectors provide easy field connections between components and control circuitry. Mis-wiring is minimized by use of plug connectors. Very often installed labor costs can be reduced by using pre-wired devices.

 

 

FEATURES

Metal Shrouded Connectors

Metal and plastic housings
Wide selection
Can be utilized for low voltage and low current applications
Plastic Plug Connectors
Plastic housings
BENEFITS
Durable housings
Reduces wiring time
Eliminates mis-wiring

 

 

TECHNICAL

Metal-shrouded Connectors

3 types
Socket and plug
Plug and socket
Coupling socket and plug
Dull chrome-plated brass housing
Available in 4, 7, 8, 12, 19 pin arrangements
Environmental protection IP 67 – oil and dust tight, and water resistant (connected)
Ambient temperature – 20 to + 80C
With PE 250 VAC/DC, rated current 6 amps
Without PE 50 VDC/DC, rated current 6 amps
Gold plated solder terminals
Conforms to DIN 43651
High-strength glass reinforced PET housing
2 designs straight or 90° models
2 pin configurations
7 pins with PE
250 VAC/DC, rated current 10 amps
12 pins with PE
50 VAC/DC, Rated Current 5 Amps
Environmental protection IP 65 – oil and dust tight, and water spray (connected)
Ambient temperature – 40 to + 90C
Gold plated crimp contacts
Inductive Identification Systems
EUCHNER Inductive Identification Systems permit contact-free identification of pallets, work pieces and parts in a dynamic manufacturing environment. In the simplest form, a CIS System consists of an inductive read or read write head and a data carrier. The heads can interface to a PLC or PC.

 

 

 

TYPICAL APPLICATIONS INCLUDE

 

Assembly lines, Robot cell, Material handling, Food processing, Heat treat operations, Waste management, Hospitals, Automated finishing systems, Many other industrial and non-industrial applications
CIS systems can be configured to meet your data transfer requirements
Unlimited read cycles with write cycles up to 100 million
Large storage capacity
Interfaces to PLC’s and PC’s
Large variety of carriers with EEPROM and FRAM storage technology
Inductive transfer of data not affected by RF signals
Battery free data carriers
No maintenance
The CIS identification system affords the following advantages:

Read/write head with serial RS232, RS422 and InterBus S interface
Easy integration with any field bus system
Various carriers and heads available to meet project requirements
Data retention up to 20 years
Miniature system available for small articles
Dynamic reading and writing of data carriers

Ident System can be configured to meet your data transfer requirements

Inductive read/write data carriers
Up to 40mm read distance
Up to 20mm write distance
Carriers are chemical resistant
Read/write heads environmental protection up to IP 67- oil and dust tight, and water resistant
Data carriers environmental protection IP 67- oil and dust tight, and water resistant
Storage capacity as large as 32kByte
Dynamic reading of up to 90m/min
Limit Switches
EUCHNER Limit Switches are used for the control and monitoring of Automated Machinery and Industrial Equipment. The high quality materials, the combination of mature technology, high precision and practical design make Euchner switches a good, reliable and trouble free choice for your machinery and equipment. Euchner limit switches offer plastic and metal corrosion resistant housings. Certain models are available with direct opening contacts for safety applications. Our limit switches are easy to install and offer a variety of housing styles and actuator heads to fit your specific design requirements

NM Design Type 1 Safety Limit Switches:
Narrow body plastic safety limit switch with up to 3 contacts and 6 different actuator heads
NZ Design Type 1 Safety Limit Switches:
Die cast aluminum safety limit switch with up to 4 contacts and 10 different actuator heads

EGT Single Hole Fixing Limit Switches:
Cylindrical design enabling direct mounting inside a smooth or threaded hole.
EGM Single Hole Fixing Limit Switches:
Line of highly accurate cylindrical single hole fixing switches with short stroke plungers.
Precision Single Plunger Limit Switches:
Line of highly accurate positioning switches with 9 housings and 5 plungers.

Precision Multiple Limit Switches
In 1952, EUCHNER developed and introduced the world’s first Multiple Limit Switch. It was seen as a breakthrough in modern automation technology. Today, EUCHNER Precision Multiple Limit Switches are used for the control and positioning of all kinds of automated machinery and industrial equipment. Euchner offers a variety of plunger styles and housings including DIN versions to meet your design needs. Both horizontal and vertical plunger arrangements are available. Snap-action and slow-action switching elements can be specified. Positive break safety contacts and LED status indicators are also available, as well as exterior diaphragms designed to resist the effects of resinous cooling lubricants, fuels and hydraulic fluids. These switches are manufactured with high-grade materials and strict quality control to offer years of worry free operation. Our latest innovation, the RGCS, features a replaceable plunger head assembly to eliminate re-adjustment of the switch during servicing. This reduces downtime and replacement costs.
8 different housing designs
5 types of plungers
Up to 20 plungers in one housing
High cycling capability
300 operations per minute
Impervious to a wide variety of contaminants
Mixed plunger assemblies
Mechanical and inductive elements
Precision and safety contacts
Status LED’s
Minimum space requirements due to compact design
Easy installation
Rated for millions of operations
Low connection costs with screw terminations or plug connectors
Easy access to all switch stations for test and service purposes
Special versions for harsh or unique applications

2 types of housing materials
Anodized die-cast aluminum
Cast iron
Stainless steel plungers
8, 12 or 16 mm spacing
Environmental protection IP67 – oil and dust tight, and water resistant
Exceeds NEMA 4
Ambient operating temperature -20 to 80°C
30 million mechanical operations
Operating repeatability up to +/- .002mm
Maximum approach speed up to 80 m/min
Contacts
Form C or isolated contacts
250VAC/DC 10A
Gold flashed silver alloy contacts
Fine silver-high fidelity available
NAMUR switching elements

 

 

 

Inductive Sensors

 

EUCHNER offers Inductive Limit Switches that are Non-Contact sensors used for the control and monitoring of Machinery and Industrial Equipment. The switch detects metal as it passes, causing actuation. The robust design allows our Inductive Sensors to be used as an alternative to mechanical switches in extreme conditions. EUCHNER offers various mounting profiles to fit your application. These are available in single inductive limit switches in different sizes and housings and in multiple inductive limit switches with various different housings.
Inductive Single Limit Switch:
EUCHNER Inductive Single Limit Switches are Non-Contact sensors used for the control and monitoring of Machinery and Industrial Equipment. The switch detects metal as it passes, causing actuation. The robust design allows our Inductive Sensors to be used as an alternative to mechanical switches in extreme conditions. EUCHNER offers various mounting profiles to fit your application.
Inductive Multiple Limit Switch:
EUCHNER Inductive Multiple Limit Switches are Non-Contact sensors used for the control and monitoring of Machinery and Industrial Equipment. The switch detects metal as it passes, causing actuation. Up to 20 sensors per housing are available in various mounting profiles. The robust design allows our Inductive Multiple Sensors to be used as an alternative to mechanical switches in extreme conditions.
Cylindrical Proximity Switches:
Inductive cylindrical proximity switches are offered in wide variety of sizes and sensing ranges. Proximity switches are commonly used to detect position or movement of material, cutters, fixtures or parts.

 

Trip Dogs and Rails

EUCHNER Trip Dogs (Cams) and Trip Rails (Cam Trays) are used to actuate mechanical and inductive limit switches. The trip rail is mounted to a moving member and the trip dogs are fastened to the rail. The assembly moves as the machine member moves, thus causing switch actuation. EUCHNER offers a wide variety of trip dogs and trip rails to fit your applications..
Machine tools, Plastics, Woodworking, Transfer lines, Loading equipment
Trip Rails Features
Meet DIN 69638
Extruded aluminum or cast iron
T-slot or surface mount
Modular kits available
Meet DIN 69639
Treated steel
Minimizes corrosion
U-trip dogs are designed with a split plate clamping mechanism for exact adjustment
G-trip dogs are clamped to rail with a hexagon socket screw and special spring washer ensuring precise positioning even when mounted vertically
Extremely accurate
+/- 0.002mm
Long service life
Low mechanical wear
High corrosion resistance
Application friendly
Precise engineering ensures accuracy and repeatability
Designed to meet strict standards as required by application
2 types of trip rails
System U
System G
4000mm maximum length
Aluminum, steel or cast iron
1 to 20 slots
Trip Dogs
Up to 1400 mm
Mechanical actuation or proximity
Hardened steel
Ground and polished
Black finish

Leave a Comment

Your email address will not be published. Required fields are marked *