Flucke

 

Flucke

 

Fluke 754-drawing

 

Built with Fluke Connect™

 

 

 

Fluke Connect FAQs »

 

Powerful high-performance features make troubleshooting fast and easy.

Technology changes. The last thing we want is for you to feel like you’re missing out on critical innovations, so Fluke has engineered the Ti400 infrared camera to adapt to change.

Being future-ready is part of its DNA. You can test and measure with wireless speed and ease and connect with other wireless devices. If there’s an infrared camera in your future, make sure it’s one with a future.

 

Auto Focus Redefined

Get an in-focus image like never before with the touch of a button. LaserSharp® Auto Focus, exclusive to Fluke, uses a built-in laser distance meter that calculates and displays the distance to your designated target with pinpoint accuracy. Other auto focus systems may focus on the surrounding landscape or closer targets and compromise an in-focus and your ability to get accurate temperature measurements.

On target and in-focus. Every. Single. Time.

Compatible with the largest suite of connected test tools in the world.

Fluke Connect™ is the only wireless test and measurement system that lets you stay in contact with your team without leaving the field. Keep your facility up and running with Fluke Connect ShareLive™ video call. Communicate critical data and get answers and additional work approvals instantly without leaving the inspection site. Get started saving time and increasing productivity now with Fluke Connect.

Field installable telephoto and wide angle lenses are available for added versatility for special applications and voice annotation makes pen and paper no longer necessary.

As always, Fluke SmartView® software is included at no additional charge.
Customers spoke and we listened!

Our customers asked for a product as convenient as an infrared thermometer, as insightful as a thermal imager, with the visual context of a digital camera. Using hyper-thin pyroelectric technology, Fluke discovered a way to push the limits of this technology pioneering an array dense enough to create an infrared heat map. In the past, blending has been the exclusive territory of thermal imagers priced five to ten times higher, but not anymore. It’s standard with your new visual IR thermometer.

The VT02 is the original visual IR thermometer that includes a digital camera with a thermal heat map overlay, hot and cold markers, and the ability to document your work and create reports. For 4x sharper images than the VT02 and powerful temperature alarm features, see the VT04A.

 

See the Difference

 

See how a traditional IR Thermometer and an entry level infrared camera make it challenging to communicate the issue on breaker 20.

Visual IR Thermometer technology comparison Visual IR Thermometer technology comparison Visual IR Thermometer technology comparison Visual IR Thermometer technology comparison

Visual inspection
No issues are obvious to the naked eye

Traditional IR
thermometer
Optimized for single point measurements

Entry level
infrared camera
Challenging to see the exact location

Visual IR Thermometer
Digital image with heat map overlay provide context to instantly tell you the exact location

Traditional infrared thermometers may seem affordable and convenient, but they only show an average temperature of an area, and the farther away, the less accurate. Furthermore, IR thermometers require the tedious tasks of taking multiple grid readings and manually recording temperature measurements.

With the Fluke VT02 Visual IR Thermometer you get the visual image of exactly what you are measuring. So whether you are an electrician, electrical contractor, HVAC, industrial maintenance, automotive, or general maintenance, the Fluke VT02 Visual IR Thermometer will help you measure with confidence, diagnose problems instantly, and expand your business!

 

Designed to See it All

 

Every Fluke Visual IR Thermometer has a built-in digital camera with thermal heat map overlay to instantly identify the exact location of the problem.
The centerpoint temperature measurement of this image is 48.6°C (also available in Fahrenheit).
The digital image shows the breaker numbers on the panel.
The thermal heat map overlay clearly identifies breaker 20 as overloaded.
With a push of a button, adjust the heat map blend for the ideal level of detail.

25% heat map

50% heat map

75% heat map
Top Related Products

Ti105 Thermal Camera with Fluke Connect.
Fluke Ti105 Infrared Camera for Industrial and Commercial Applications »

★★★★★
★★★★★ 5 out of 5 stars. Read reviews. 5.0 (2)

Fluke VT04A Visual IR Thermometer »
Fluke VT04 Visual IR Thermometer HVAC Combo Kit »
Fluke VT04 Visual IR Thermometer Electrical Combo Kit »
Fluke VT04 Visual IR Thermometer Maintenance Combo Kit »
Fluke 62 MAX+ Infrared Thermometer »

Measure with confidence
Because traditional infrared thermometers only measure an average area, it is often impossible to accurately identify what you are actually measuring; with the Fluke VT02 Visual IR Thermometer you get the visual image of exactly what you are measuring.

Detect issues instantaneously
Lose the pen, paper, and clipboard, the Fluke VT02 saves a blended infrared and visual image with every image capture instantly! In one blended picture your customers get the complete picture and can compare readings from different dates which saves them valuable time and ultimately money.

The Fluke VT02 has a NEAR/FAR feature that is not available on other products. The NEAR/FAR is exclusive to Fluke Visual IR Thermometers and allows the user to take simultaneous visual images with the thermal heat map images that are accurately aligned close in, ≤ 23 cm (9 in), with the NEAR feature, as well as beyond with the FAR feature. No other product can boast this NEAR visual and thermal heat map alignment feature that allows you to get close-in and document the exact location of the issue.

Near Mode Far Mode
Pinpoint with hot and cold markers
Quick and easy detection with hot and cold trackers allow you to pinpoint the temperature source. When you see a hot or cold spot, you can save the image with the temperature reading and pinpoint the exact location using the blending between full thermal to full visual.

Document problems with SmartView® software – a brilliant way to sell yourself
Producing a professional report with Smartview® Software is just as powerful as the VT02 tool itself. Your customers will be able to communicate the issues that they’ve detected or document repairs that have been fixed.

Troubleshoot efficiently
The greatest technological advancement may be how Fluke has made it so simple to capture and blend images. Compact and intuitive, the Fluke VT02’s point & shoot focus free design starts finding problems right out of the box with little to no training required.

Expand diagnostic services with the Visual Infrared Thermometer. The first to find the problem is oftentimes the first in line to fix the problem. Telling someone they have a problem is not nearly as convincing as proving your point with a visual image blended with a thermal heat map. With the striking affordability of the VT02, your clients can add a high margin service and move from buying one thermal imager for their company to a business expanding tool for each associate.

 

Model Name Description

FLK-VT02 Fluke VT02 Visual IR Thermometer
Buy It

Includes:

VT02 Visual IR Thermometer
Soft case*
Micro-SD card
Micro-SD conversion adapter to standard
AA Batteries (4)
Printed Quick Start guides (English, French, German, Spanish, Simplified Chinese)
Available for free download:

SmartView®

analysis and reporting software »
Manual »
Quick Start guide »
*To lower pricing on the VT02, future inventory no longer includes the lanyard, the SmartView® software CD, the Manual CD, and the hard case (soft case included instead).
The 1586A Super-DAQ is the most accurate and flexible temperature data acquisition system on the market. It scans and records temperature, DC voltage, DC current, and resistance for up to 40 input channels and scan speeds as fast as 10 channels per second. The Super-DAQ can be configured for use as a multi-channel data logger in the factory or as a precision reference thermometer for benchtop sensor calibration in the lab.

Measure thermocouples, PRTs, thermistors, DC voltage, DC current, and resistance
Best-in-class temperature measurement accuracy
PRTs ±0.005°C (using external DAQ-STAQ Multiplexer)
Thermocouples: ±0.5°C (using High-Capacity Module and internal CJC)
Thermistors: ±0.002°C
Input channels: Up to 40 isolated universal inputs
Flexible configuration: Internal High-Capacity Module and/or DAQ-STAQ Multiplexer
Selectable scan speed: Up to 10 channels per second
Four modes of operation: Scan, Monitor, Measure, Digital Multimeter (DMM)
Real-time color trending: Chart up to four channels simultaneously
6 1/2 digit display resolution for DC voltage, DC current, and resistance
Current reversal minimizes thermoelectric effects, improving PRT/RTD measurment accuracy
Automated sensor calibration: Control Fluke Calibration temperature sources such as dry-wells or micro-baths for automated calibration routines
Data storage: Records up to 20 MB of data and setup files to internal non-volatile memory or to an external USB drive. Transfer data to a PC using the USB drive or LAN connection and view data in Microsoft® Excel
Data security: Administrator and user profiles for protecting settings and ensuring test traceability
Mx + B scaling and channel offset zero function
Alarms: Two independent, user-defined alarms for each channel indicate when an upper or lower range has been exceeded
1586A Super-DAQ Precision Temperature Scanner

The 1586A Super-DAQ collects time-stamped precision temperature and electrical measurements for data analysis by technicians, engineers, and quality control personnel to verify process control, analyze interactive systems, ensure conformance to quality standards, or to correlate related events for R&D or troubleshooting. Measurement data and statistics can be viewed in tabular format for all active channels. With the graphing feature, up to four channels can be plotted at the same time, making it easy to quickly assess test setup and results before analyzing the data on a PC.

When configured with the DAQ-STAQ Multiplexer, the Super-DAQ has the accuracy of the best benchtop reference thermometer readouts for calibration of PRTs, RTDs, thermistors, or thermocouples. Lab efficiency can be increased when the Super-DAQ is connected to a Fluke Calibration drywell or bath and Automated Sensor Test routines are run.

The 1586 is ideal for a number of applications such as thermal mapping, temperature validation, process sensor calibration, and more. These applications are found in a various industries including pharmaceutical, biotechnology, food processing, aerospace, and automotive.

There are six key features that set the Super-DAQ apart from other products in its class:

Best temperature measurement accuracy
Flexible configuration for the factory or benchtop
Multiple modes of operation
Real-time graphing in color
Data portability and security
Automated sensor calibration
1. Best temperature measurement accuracy

The 1586A Super-DAQ reads PRTs, thermocouples, and thermistors with best-in-class accuracy:

2. Flexible configuration for the factory or benchtop

For factory applications, the Super-DAQ is configured with the internal High-Capacity Module. Connecting thermocouples or RTDs to input terminals can be time consuming—especially if you’re using many sensors of the same type for one job, and then switching to a different sensor type for another job. The internal High-Capacity Module allows you to pre-configure multiple input modules and simply exchange one module for another, depending on your test requirements. Recall a stored test setup to make the changeover even faster. And if you prefer, you can always measure a variety of different input types at the same time in a single High-Capacity Module, including thermocouples, RTDs, voltage, resistance, or current.

For a calibration lab where accuracy is of primary importance, the Super-DAQ is best configured with a DAQ-STAQ Multiplexer. The external DAQ-STAQ features mini-jack thermocouple terminals—each with its own reference junction sensor—and patented mini-DWF, gold-plated input terminals, which accept bare wire, spade lug, or mini-banana-plug terminations. Easily connect and disconnect PRTs, thermistors, and thermocouples for benchtop temperature calibration. It can be stacked on the 1586 to reduce footprint in busy labs. Flexibility to configure the Super-DAQ for factory or calibration lab use reduces your equipment needs and cost.

 

3. Multiple modes of operation

 

The Super-DAQ can operate in four modes that let you scan, monitor, measure, or function as a digital multimeter from a single instrument. Sequentially scan through channels based on a user defined test. Monitor any single channel during a scan, without interrupting the scan. Measure and record data on a single channel without the need of a pre-configured test file. Or in DMM mode, use the front panel channel like a familiar benchtop digital multimeter to quickly measure dc voltage, dc current, or 2-wire and 4-wire resistance without the need to configure the channel.

 

 

4. Real-time graphing in color

 

Most data acquisition systems only let you view data on one channel. But now the Super-DAQ, lets you view real time data for all channels in table format, or you can chart up to four channels in color at the same time. You can zoom in or out to see data of interest and monitor trends. A history mode lets you scroll through collected data within a scan file—all without a PC and expensive charting programs. Switch between chart view and table view of various measurement data and statistics

5. Data portability and security

The Super-DAQ includes 20 MB internal memory that can store over 75,000 time-stamped readings. Data and set-up files can be easily moved to a PC for analysis using a USB flash drive or over a network using the LAN interface connection. The Super-DAQ also includes two levels of data security to prevent unauthorized users from tampering with or forging test data or setup files. This security feature is especially important to industries that are regulated by government agencies where data traceability is required.

 

6. Automated sensor calibration

 

With the Automated Test feature, you can automate sensor calibration without a PC and software. When connected to a Fluke Calibration drywell or fluid bath via the RS-232 interface, the Super-DAQ takes control of the temperature source and runs your calibration automatically. You simply program the number of setpoint temperatures and their values, select a scan sequence (linear, alternate, up/down), assign a reference channel, and set the required stability band. The Super-DAQ monitors the temperature source’s stability via the reference channel, collects the data once stabilized, and then advances to the next setpoint temperature. After you configure and start the test, you can walk away to work on other things. The Super-DAQ just made your day a whole lot easier.
General Specifications
Mains voltage 100 V setting 90 V to 110 V
120 V setting 108 V to 132 V
220 V setting 198 V to 242 V
240 V setting 216 V to 264 V
Frequency 47 Hz to 440 Hz
Power consumption 36 VA peak (24 W average)
Environment temperature Operating 0°C to 50°C
Full accuracy 18°C to 28°C
Storage −20°C to 70°C
Warm-up 1 hour to full accuracy specifications
Relative humidity (non-condensing) Operating 0°C to 30°C <80%; 30°C to 50°C <50%
Storage −20°C to 70°C <95%
Altitude Operating 2,000 m
Storage 12,000 m
Vibration and shock Complies with MIL-PRF-28800F Class 3
Channel capacity Total analog channels 45
Voltage/resistance channels 41
Current channels 5
Digital I/O 8 bits
Totalizer 1
Alarm outputs 6
Trigger input 1
Input protection 50 V all functions, terminals and ranges
Math channels Number of channels 20
Operations Sum, difference, multiply, divide, polynomial, power, square root, reciprocal, exponential, logarithm, absolute value, average, maximum, minimum
Triggers interval, external (trigger input), alarm, remote (bus), manual, automated test
Memory Scan data RAM 75,000 readings with timestamp
Data/setup flash memory 20 MB
USB host port Connector type Type A
Function Memory
File system FAT32
Memory capacity 32 GB
USB Device Port Connector type Type B
Class Instrument
Function Control and data transfer
Command protocol SCPI
LAN Function Control and data transfer
Network protocols Ethernet 10/100, TCP/IP
RS-232 Connector D-sub 9 pin (DE-9)
Baud rates 1200, 2400, 4800, 9600, 19200, 38400
Function Temperature source control output
Dimensions Height 150 mm
Width 245 mm
Depth 385 mm weight: 6 kg (typical configuration)
Shipping weight 9.5 kg (typical configuration)
Conformity CE, CSA, IEC 61010 3rd ed.
Measurement Specifications
Accuracy specifications generally apply with medium and slow sample rates (unless otherwise noted), after a warm-up time of 1 hour, and within an environment temperature range of 18°C to 28°C, and may depend on the channel. The confidence level for accuracy specifications is 95% within 1 year of calibration.
Scan rate Fast 10 channels per second max (0.1 seconds per channel) Medium: 1 channel per second (1 second per channel)
Slow 4 seconds per channel
Display resolution 6 1/2 digits (see Measurement Characteristics tables below to find the display resolution of temperature readings)
PRT/RTD
Temperature range −200°C to 1200°C (depending on the sensor)
Resistance range 0 Ω to 4 kΩ
Offset compensation 0 Ω to 400 Ω, 4-wire Automatic current reversal
400 Ω to 4000 Ω or 3-wire none
Source current reversal interval (0 Ω to 400 Ω range) Fast sample rate 2 ms
Medium sample rate 250 ms
Slow sample rate 250 ms
Maximum Lead Resistance (4-wire Ω) 2.5% of range per lead for 400 Ω and 4 kΩ ranges
PRT/RTD Resistance Accuracy
Accuracy is given as % of measurement or ohms, whichever is greater. Basic accuracy is for 4-wire PRT/RTD. When using 3-wire PRT/RTD add 0.013 Ω to the accuracy specification for internal resistance mismatch and voltage offset if using Channel 1, or add 0.05 Ω if using channels x01 through x20. If the environment temperature is outside the specified range, multiply the temperature coefficient numbers by the temperature deviation and add to the accuracy specification.
Range Sample rate DAQ-STAQ module and channel 1 High-capacity module T.C./°C outside 18°C to 28°C
0 Ω to 400 Ω Slow 0.002% or 0.0008 Ω 0.003% or 0.003 Ω 0.0001% or 0.0008 Ω
Medium 0.002% or 0.002 Ω 0.003% or 0.003 Ω 0.0001% or 0.0008 Ω
Fast 0.002% or 0.005 Ω 0.003% or 0.006 Ω 0.0001% or 0.0008 Ω
400 Ω to 4 kΩ Slow 0.004% or 0.06 Ω 0.006% or 0.06 Ω 0.0001% or 0.008 Ω
Medium 0.004% or 0.1 Ω 0.006% or 0.1 Ω 0.0001% or 0.008 Ω
Fast 0.004% or 0.18 Ω 0.006% or 0.18 Ω 0.0001% or 0.008 Ω
PRT/RTD Temperature Accuracy
Accuracy is for 4-wire 100 Ω nominal PRT/RTD. When using 3-wire PRT/RTD add 0.039°C to the accuracy specification for internal resistance mismatch and voltage offset if using Channel 1, or add 0.15°C if using channels x01 through x20. If the environment temperature is outside the specified range, multiply the temperature coefficient number by the temperature deviation and add to the accuracy specification. Linear interpolation may be used between points in the table. Specifications do not include sensor accuracy. The practical range of temperature measurement depends on the sensor and characterization.
Sample rate Temperature DAQ-STAQ module and channel 1 High-capacity module T.C./°C outside 18°C to 28°C
Slow −200°C 0.002°C 0.008°C 0.002°C
0°C 0.005°C 0.008°C 0.003°C
300°C 0.012°C 0.018°C 0.006°C
600°C 0.02°C 0.03°C 0.01°C
Medium −200°C 0.005°C 0.008°C 0.002°C
Fast −200°C 0.013°C 0.015°C 0.002°C
0°C 0.013°C 0.015°C 0.003°C
300°C 0.014°C 0.018°C 0.006°C
PRT/RTD Measurement Characteristics
Temperature display resolution
Range Slow/medium sample rate Fast sample rate Source current
0 Ω to 400 Ω 0.001°C 0.01°C ±1 mA
400 Ω to 4 kΩ 0.001°C 0.01°C 0.1 mA
Thermistor
Temperature Range −200°C to 400°C (depending on the sensor)
Resistance Range 0 Ω to 1 MΩ
Thermistor Resistance Accuracy
Accuracy is given as ±(% of measurement + Ω). The basic accuracy specification is for 4-wire thermistor, slow sample rate. When using medium or fast sample rate, add the number given in the table to the accuracy specification. If the environment temperature is outside the specified range, multiply the temperature coefficient numbers by the temperature deviation and add to the accuracy specification. For 2-wire thermistor add 0.02 Ω internal resistance if using Channel 1 or 1.5 Ω if using channels x01 through x20, and add external lead wire resistance.
Range Slow sample rate Medium sample rate Fast sample rate T.C./°C outside18°C to 28°C
0 Ω to 2.2 Ω 0.004% + 0.2 Ω add 0.3 Ω add 1 Ω 0.0005% + 0.05 Ω
2.1 Ω to 98 Ω 0.004% + 0.5 Ω add 0.5 Ω add 1.3 Ω 0.0005% + 0.1 Ω
95 Ω to 1 MΩ 0.015% + 5 Ω add 5 Ω add 13 Ω 0.001% + 2 Ω
Thermistor Temperature Accuracy
Accuracy specifications are for 4-wire thermistor. When using 2-wire thermistor, add the number given in the table to the specification for internal resistance. If the environment temperature is outside the specified range, increase the accuracy specification by 25% for every 1°C outside the specified environment temperature range. Specifications do not include sensor accuracy. The practical range of temperature measurement depends on the sensor.
Accuracy 2.2 Ω Thermistor
Temperature Slow sample rate Medium sample rate Fast sample rate 2-wire
−40°C 0.001°C 0.001°C 0.01°C add 0.001°C
0°C 0.003°C 0.004°C 0.01°C add 0.004°C
25°C 0.006°C 0.011°C 0.02°C add 0.016°C
50°C 0.008°C 0.018°C 0.04°C add 0.05°C
100°C 0.047°C 0.114°C 0.28°C add 0.34°C
150°C 0.23°C 0.56°C 1.34°C add 1.7°C
Accuracy 5 Ω Thermistor
−40°C 0.003°C 0.004°C 0.01°C add 0.001°C
0°C 0.002°C 0.002°C 0.01°C add 0.002°C
25°C 0.004°C 0.006°C 0.01°C add 0.007°C
50°C 0.005°C 0.009°C 0.02°C add 0.022°C
100°C 0.022°C 0.052°C 0.13°C add 0.16°C
150°C 0.096°C 0.24°C 0.57°C add 0.7°C
Accuracy 10 Ω Thermistor
25°C 0.003°C 0.004°C 0.01°C add 0.004°C
50°C 0.005°C 0.009°C 0.02°C add 0.011°C
100°C 0.011°C 0.024°C 0.06°C add 0.067°C
150°C 0.04°C 0.098°C 0.24°C add 0.29°C
Thermistor Measurement Characteristics
Temperature Display Resolution
0 Ω to 2.2 Ω 0.0001°C 0.001°C 10 μA
2.1 Ω to 98 Ω 0.0001°C 0.001°C 10 μA
95 Ω to 1 MΩ 0.0001°C 0.001°C 1 μA
Thermocouple
Temperature range −270°C to 2315°C (depending on the sensor)
Voltage range −15 mV to 100 mV
Thermocouple Voltage Accuracy
Accuracy is given as ±(|% of measurement| + μV). Basic accuracy specification is for medium or slow sample rate. When using a fast sample rate add the number given in the table to the accuracy specification. If the environment temperature is outside the specified range, multiply the temperature coefficient numbers by the temperature deviation and add to the accuracy specification.
Range Accuracy channel 1 Ch. x01 – x20 Fast sample rate T.C./°C outside
18°C to 28°C
−15 mV to 100 mV 0.004% + 4 μV add 2 μV add 1 μV 0.0005% + 0.0005 mV
Thermocouple Reference Junction Accuracy
Module CJC accuracy T.C./°C outside
DAQ-STAQ module 0.25°C 0.02°C
High-capacity module 0.6°C 0.05°C
Thermocouple Temperature Accuracy
Accuracy specifications apply using medium or slow sample rate. When using fast sample rate, increase the accuracy specification by 25%. If the environment temperature is outside the specified range, increase the accuracy specification by 12% for every 1°C outside the specified environment temperature range. Accuracy with fixed/external CJC does not include the accuracy of the reference junction temperature. Linear interpolation may be used between points in the table. Specifications do not include sensor accuracy. The practical range of temperature measurement depends on the sensor.
Type(Range) Temperature Accuracy
Fixed/external CJC Internal CJC
Channel 1 Ch. x01 – x20 DAQ-STAQ module High-capacity
module
K
−270°C to
1372°C −200°C
0°C
1000°C 0.28°C
0.10°C
0.14°C 0.41°C
0.15°C
0.20°C 0.76°C
0.29°C
0.32°C 1.60°C
0.62°C
0.64°C
T
400°C −200°C
200°C
400°C 0.27°C
0.08°C
0.08°C 0.40°C
0.12°C
0.11°C 0.76°C
0.30°C
0.23°C
0.20°C 1.60°C
0.65°C
0.47°C
0.41°C
R
−50°C to
1768°C 0°C
300°C
1200°C
1600°C 0.76°C
0.42°C
0.33°C
0.34°C 1.13°C
0.63°C
0.49°C 1.16°C
0.48°C
0.50°C 1.28°C
0.71°C
0.52°C
0.54°C
S
1600°C 0.74°C
0.45°C
0.37°C
0.39°C 1.11°C
0.67°C
0.56°C 1.14°C
0.68°C
0.55°C
0.57°C 1.26°C
0.76°C
0.60°C
J
−210°C to
1200°C −200°C
1000°C 0.20°C
0.11°C 0.29°C
0.14°C 0.65°C
0.28°C
0.25°C 1.41°C
0.61°C
0.53°C
N
1300°C −200°C
500°C
1000°C 0.42°C
0.14°C 0.62°C
0.17°C
0.19°C 0.90°C
0.34°C
0.24°C
0.26°C 1.69°C
0.44°C
E
1000°C −200°C
700°C 0.17°C
0.07°C
0.06°C
0.08°C 0.25°C
0.09°C
0.10°C 0.64°C
0.27°C
0.21°C
0.21°C 1.42°C
0.46°C
B
100°C to
1820°C 300°C
600°C
1600°C 1.32°C
0.38°C 1.97°C
1.02°C
0.55°C 1.97°C
C
0°C to
2315°C 600°C
2000°C 0.23°C
0.44°C 0.33°C
0.40°C
0.60°C 0.37°C
0.66°C 0.54°C
0.91°C
D
2000°C 0.22°C
0.26°C
0.39°C 0.32°C
0.36°C
0.53°C 0.34°C
0.39°C
0.56°C 0.44°C
0.49°C
0.69°C
G
2000°C 0.24°C
0.22°C
0.33°C 0.36°C
0.32°C
0.46°C 0.36°C
L
−200°C to
900°C −200°C
800°C 0.13°C
0.09°C 0.19°C
0.12°C 0.45°C
0.23°C 0.99°C
M
1410°C 0°C
1000°C 0.11°C
0.10°C 0.16°C
0.14°C 0.30°C
0.25°C
0.21°C 0.64°C
0.51°C
U
600°C −200°C
400°C 0.25°C
0.08°C 0.37°C
0.11°C 0.71°C
0.20°C 1.48°C
W
Thermocouple Measurement Characteristics
Range Temperature display resolution
Slow/medium sample rate Fast sample rate
−270°C to 2315°C 0.01°C 0.1°C
DC Voltage
Maximum Input 50 V on any range
Common Mode Rejection 140 dB at 50 Hz or 60 Hz (1 kΩ unbalance in LOW lead) ±50 V peak maximum
Normal Mode Rejection 55 dB for power line frequency ±0.1%, ±120% of range peak maximum
A/D Linearity 2 ppm of measurement + 1 ppm of range
Input Bias Current 30 pA at 25°C
DC Voltage Accuracy
Accuracy is given as ±(% measurement + % of range). Basic accuracy specification is for Channel 1, medium or slow sample rate. For channels x01 through x20 or when using Fast sample rate, add the numbers given in the table to the accuracy specification. If the environment temperature is outside the specified range, multiply the temperature coefficient numbers by the temperature deviation and add to the accuracy specification.
±100 mV 0.0037% + 0.0035% add 2 μ add 0.0008% of range 0.0005% + 0.0005%
±1 V 0.0025% + 0.0007% add 2 μ add 0.0008% of range 0.0005% + 0.0001%
±10 V 0.0024% + 0.0005% − add 0.0008% of range 0.0005% + 0.0001%
±50 V 0.0038% + 0.0012% − add 0.0008% of range 0.0005% + 0.0001%
DC Voltage Input Characteristics
Resolution Input Impedance
Range Slow/medium Fast
±100 mV 0.1 μ 1 μ 10 GΩ 1
±1 V 1 μ 10 μ 10 GΩ 1
±10 V 10 μ 100 μ 10 GΩ 1
±50 V 100 μ 1 mV 10 MΩ ±1%
1. Input beyond ±12 V is clamped. The clamp current is up to 3 mA.
DC Current
Input Protection 0.15 A resettable PTC
DC Current Accuracy
Accuracy is given as ±(% measurement + % of range). Basic accuracy specification is for medium or slow sample rate. When using a fast sample rate, add the number given in the table to the accuracy specification. If the environment temperature is outside the specified range, multiply the temperature coefficient numbers by the temperature deviation and add to the accuracy specification.
Range Accuracy Fast sample rate T.C./°C outside
±100 μA 0.015% + 0.0035% add 0.0008% of range 0.002% + 0.001%
±1 mA 0.015% + 0.0011% add 0.0008% of range 0.002% + 0.001%
±10 mA 0.015% + 0.0035% add 0.0008% of range 0.002% + 0.001%
±100 mA 0.015% + 0.0035% add 0.0008% of range 0.002% + 0.001%
DC Current Input Characteristics
Resolution
Range Slow/medium Fast Burden voltage
±100 μA 0.1 nA 1 nA < 1 mV
±1 mA 1 nA 10 nA < 1 mV
±10 mA 10 nA 100 nA < 1 mV
±100 mA 100 nA 1 μA < 1 mV
Resistance
Max. Lead Resistance (4-wire ohms) 10 Ω per lead for 100 Ω and 1 kΩ ranges. 1 kΩ per lead on all other ranges.
Resistance Accuracy
Accuracy is given as ±(% measurement + % of range). Basic accuracy specification is for 4-wire resistance, medium or slow sample rate. For 2-wire resistance add 0.02 Ω internal resistance if using Channel 1, or 1.5 Ω if using channels x01 through x20, and add external lead wire resistance. When using Fast sample rate, add the numbers given in the table to the accuracy specification. If the environment temperature is outside the specified range, multiply the Temperature Coefficient numbers by the temperature deviation and add to the accuracy specification
Range Accuracy Fast sample rate 1T.C./°C outside
8°C to 28°C
100 Ω 0.004% + 0.0035% add 0.001% of range 0.0001% + 0.0005%
1 kΩ 0.003% + 0.001% add 0.001% of range 0.0001% + 0.0001%
10 kΩ 0.004% + 0.001% add 0.001% of range 0.0001% + 0.0001%
100 kΩ 0.004% + 0.001% add 0.001% of range 0.0001% + 0.0001%
1 MΩ 0.006% + 0.001% add 0.002% of reading plus 0.0008% of range 0.0005% + 0.0002%
10 MΩ 0.015% + 0.001% add 0.002% of reading plus 0.0008% of range 0.001% + 0.0004%
100 MΩ 0.8% + 0.01% add 0.01% of range 0.05% + 0.002%
Resistance Input Characteristics
Range Resolution
slow/medium Fast Source current
(open-circuit voltage)
100 Ω 0.1 mΩ 1 mΩ 1 mA (4 V)
1 kΩ 1 mΩ 10 mΩ 1 mA (4 V)
10 kΩ 10 mΩ 100 mΩ 100 μA (6 V)
100 kΩ 100 mΩ 1 Ω 100 μA (12 V)
1 MΩ 1 Ω 10 Ω 10 μA (12 V)
10 MΩ 10 Ω 100 Ω 1 μA (12 V)
100 MΩ 100 Ω 1 kΩ 0.1 μA (12 V)
Digital I/O
Absolute voltage range –4 V to 30 V
Input minimum logic high 2.0 V
Input maximum logic low 0.7 V
Output type Open drain active low
Output logic low (< 1 mA) 0 V to 0.7 V
Maximum sink current 50 mA
Output resistance 47 Ω
Totalizer
Minimum logic high 2.0 V
Maximum logic low 0.7 V
Minimum pulse width 50 μs
Maximum frequency 10 kHz
Debounce time 1.7 ms
Maximum count 1048575 (20 bits)
Trigger
Maximum latency 100 ms
Alarm output
1586-2588 DAQ-STAQ Input Module Specifications
Maximum input 50 V
Offset voltage < 2 μV
3-Wire internal resistance mismatch < 50 mΩ
Basic CJC accuracy 0.25°C
1586-2586 High-Capacity Input Module Specifications
Basic CJC accuracy 0.6°C
1586A/1DS 1586A/1DS Super-DAQ Precision Temperature Scanner
1 DAQ-STAQ Multiplexer
1586A/2DS 1586A/2DS Super-DAQ Precision Temperature Scanner
2 DAQ-STAQ Multiplexers
1586A/DS-HC 1586A/DS-HC Super-DAQ Precision Temperature Scanner
1 High-Capacity Module, 1 DAQ-STAQ Multiplexer

1586A/1HC 1586A/1HC Super-DAQ Precision Temperature Scanner

1 High-Capacity Module

1586A/2HC 1586A/2HC Super-DAQ Precision Temperature Scanner

 

2 High-Capacity Modules

Standalone or networked precision multi-channel DAQ
The Fluke 2680 Series data acquisition systems combine the best of lab precision with the rugged flexibility required in rapidly changing industrial applications. Whether you choose the 2680A Data Acquisition System with high-speed 10/100BastT Ethernet network support or the 2686A Data Logging System, you can seamlessly expand your system any time from 20 to more than 2,000 channels, just by adding modules and chassis.

Both models feature six slots in each chassis that you can fill with modules as needed to meet your application requirements. Five slots in each chassis are available for any combination of 2680 Series 20-channel analog input modules. The sixth slot is reserved for a 2680 Series digital I/O relay module to add control capabilities to your system. If you don’t need the sixth slot for control, you can plug in an additional analog input module, increasing your channel count to 120 in a single chassis.

You can also link multiple 120-channel systems together seamlessly for the widest possible view of your data. And with TCP/IP connectivity you can connect to existing LANs to distribute information wherever it needs to go. Whether you need speed and throughput, isolated precision, or digital I/O and relays, the Fluke 2680 Series can scale up to thousands of channels to meet your needs.

Features at a glance:

20 to 120 universal analog inputs per chassis; systems to +2,000 channels
Stand-alone data logger operation with the 2686A
Large scalable LAN systems using the 2680A with 10BaseT/100BaseT
Two types of Universal Input Modules: high-isolation precision modules or fast scan modules, with 16- to 18-bit resolution
Throughput of more than 3,000 channels-per-second-per-chassis with 2680A-FAI modules
Superior thermocouple measurement accuracy (J, K, R, S, T, N, I, U, C, B)
20 digital I/O and 8 form C, 1 Amp relay output modules for direct control of equipment
Up to 300V input isolation, 1600V transient overvoltage protection (2680A-PAI)
Universal input conditioning for any input, on any channel, in any combination (V dc, V ac, Ohms, frequency, RTD, thermocouple, thermistor or current
ATA flash memory card for stand-slone operation – from 16 MB to 1 GB (2686A only)
Multiple power sources: 100 to 240 V and 9 V to 45 V dc
Includes Fluke DAQ Software which: Controls all 2680 Series functions, provides real-time and historical and also communicates with and 2645A NetDAQ products
These liquid separators provide a barrier between the deadweight tester operating fluid and that of the device under test.

These instruments connect directly to the test port of a hydraulic deadweight tester and by means of a flexible diaphragm separate the fluids thus protecting the calibrator from contamination.
Versatile multimeter for manufacturing, development and service applications

5.5 digit resolution
Basic V DC accuracy of 0.015%
Dual display
Dedicated DC leakage current measurement
2 x 4 ohms 4-wire measurement technique
Six dedicated buttons for fast access to instrument setups
Hi/Lo limit compare for Pass/Fail testing
Three-year warranty
The Fluke 8808A multimeter has a broad range of functions, measuring volts, ohms and amps with a basic V DC accuracy of 0.015%. It is remarkably easy to use, even by unskilled operators, because it makes the measurements you perform most often extremely easy and fast to do.

Six setup buttons on the 8808A front panel operate like a car radio’s station presets. Simply set up the meter for a common measurement, then press shift followed by a setup button (S1 to S6) to save the setup. Now each time you perform that measurement, you simply press the appropriate setup key. It’s that easy!

The setup buttons eliminate the need to follow complex work instruction sheets. Operators no longer need to press multiple buttons to set up a measurement function and range, test limits, or enter other parameters to make a measurement.
Eliminate production mistakes
The Fluke 8808A 5.5 digit multimeter dependably performs the most common measurements required by today’s applications. Whether you are performing functional tests or making critical measurements on test points, using the limit compare mode with pass/fail indicators eliminates production mistakes, especially those where results are “on the edge.” The 8808A display has built-in enunciators that clearly show the operator whether a test passes or fails. The pass/fail indicators take the guesswork out of testing: the result is either within limits or it’s out!

Improve quality and efficiency in manufacturing test, R&D or service applications
Manufacturing test, R&D, development and service applications demand performance and flexibility from a bench meter. This Fluke 8808A makes measurements that stand up to any scrutiny. It delivers a wide variety of measurement functions, including volts, ohms, and amps, plus frequency—all at superior accuracy and resolution.

Measure two parameters at once
The 8808A features a unique dual display that allows you to measure two different parameters of the same signal from one test connection. Looking at dual interrelated parameters like voltage and current simultaneously can reveal conditions that might go unnoticed otherwise, greatly simplifying test and troubleshooting.

Measure sensitive leakage current
Typical multimeters use a shunt method to measure current, creating a measurement burden voltage that increases the error in low current measurements. This makes it difficult, if not impossible, to perform tasks such as determining the true leakage current on a battery-powered device while it is powered down, or measuring small currents in sensitive circuits. The Fluke 8808A is the only multimeter in its class to use a low-impedance operational amplifier and current-to-voltage conversion technique to eliminate the burden voltage and measure sensitive low currents. In this special mode, the 8808A can accurately measure small currents with a resolution of up to 100 nA.

Perform 4-wire measurements with only two leads
Patented split terminal jacks for the 2×4-wire ohms function allow you to perform 4-wire measurements using only two leads instead of four. Today’s surface mount components make it difficult to make connections. The task becomes even more difficult when you need to use a 4-wire technique for accurate low ohms measurements. The Fluke test lead accessory combines the four wires into two test lead pairs, making it easy for you to establish connections. You get excellent resolution and accuracy, plus the convenience and ease of using a single pair of leads.

FlukeView® Forms Basic
FlukeView Forms increases the power of your Fluke tool by enabling you to document, store and analyze individual readings or series of measurements, then convert them into professional looking documents. Transfer data points from your meter to your PC and use the standard, non-customizable forms to display your readings in table or graphical form. For a larger array of forms or to use FlukeView® Forms Designer customize your forms, upgrade to FlukeView® Forms 3.0 with FVF-UG.

Fluke quality is built in
Fluke is known around the world for its rugged, reliable, and accurate multimeters. With our experience, design standards and quality assurance processes, we have designed a multimeter that will stand up to any scrutiny of its specifications. In fact, a Fluke meter typically performs better than specified. All of our efforts are designed to ensure that you can make an accurate measurement— repeatedly, and with confidence.

Technical Specifications
Display VFD multi segment display, dual readings
Resolution 5.5 digits
V DC Range 200 mV to 1000 V
Max. resolution 1 uV
Accuracy 0.015 + 0.003
V AC Range 200 mV to 750 V
Accuracy 0.2 + 0.05
Frequency 20 Hz to 100 KHz
Resistance 2 x 4 Wire Yes
Range 200 Ω to 100 MΩ
Max. resolution 1 mΩ
Accuracy 0.02 + 0.003
A DC Range 200 µA to 10 A
Max. resolution 1 nA
Accuracy 0.02 + 0.005
A AC Range 20 mA to 10 A
Max. resolution 100 uA
Accuracy 0.3 + 0.06
Frequency 20 Hz to 2 kHz
Frequency Range 20 Hz to 1 MHz
Max. resolution 0.1 mHz
Accuracy 0.01%
Math functions dB/dBm Yes
Advanced functions Limit compare test, with pass and fail indicators
Interfaces RS-232, USB with optional adapter
Programming languages/modes Simplified ASCII, Fluke 45 remote command emulation
Weight 2.1 kg (4.6 lbs)
Size (H x W x D) 88 x 217 x 297 mm (3.46 x 8.56 x 11.7 in)
Safety Designed to comply with EN 61010-1:2001, ANSI/ISA 61010-1 (S82.02.01):2004, UL 61010-1:2004, AN/CSA C22.2 No. 61010.1:2004
Calibration documentation Statement of calibration practices included; calibration report optional
Warranty Three years
Fluke 8808A 8808A Digital Multimeter

5.5 digit multimeter, .01 %
Meter
TL71 test leads
line cord
USB to RS232 interface adapter cable
FlukeView Forms Basic Software
statement of cal practices
WEEE information sheet
Warranty statement
Getting Started guide (English, French, German, Spanish, Italian, Simplified Chinese, Japanese)
CD Rom with user manual (English)

Leave a Comment

Your email address will not be published. Required fields are marked *