We are leading Manufacturer & Service Provider for the Boiler which also includes Oil & Gas Boilers & Coal Biomass & Industrial Waste Boilers since 2013
Oil & Gas Boilers
Oil & Gas Boilers contain three product 300 kg/hr to 750 kg/hr-Minimax Boilers, 1 TPH to 5 TPH – Marshall B, 6 – 32 Ton/hr – Marshall C.
Coal Biomass & Industrial Waste Boilers
Coal, Biomass & Industrial Waste Boilers
Fully Automatic & Unmanned Multifuel Fired Boiler.
Exhaust Gas & Waste Heat Recovery Boiler
The Waste Heat Recovery Boiler from Gas Gensets offered by Forbes Marshall is a package.
Burner Oil & Gas
They are designed to fire liquid and gaseous fuels, the most common being furnace oil, light oil, natural gas and LPG.
The Modular Boiler was an idea conceived to tackle not just the issues of space but also add a value proposition to a boiler which would get the customer more that what he had obtained for.
Effimax Maximising Boiler Efficiency Monitoring Control
Complete systems for measuring steam flow and energy efficiency with online calculation and feedback.
We are leading Manufacturer & Service Provider for the Accessories which also includes Feed Water Tank Systems & Blowdown Heat Recovery Units since 2013
Feed Water Tank Systems
Feed Water Tank Systems
Complete system with accessories for total boiler feedwater management.
Blowdown Heat Recovery Units
Blowdown Heat Recovery Units
Complete system to recover upto 80% of heat lost in boiler blowdown discharge.
Deaerator Head Flash Vessel Steam Injector
Products that help improve efficiency, of steam generation above the conventional.
Automatic Blowdown Control Medium & High Pressure Blowdown
Automatic Blowdown Control, Medium & High Pressure Blowdown Systems
Systems that automate blowdown for fine control over blowdown losses.
Mainline Steam Trapping
We are leading Manufacturer & Service Provider for the Mainline Steam Trapping which also includes Thermodynamic Steam Trap & Inverted Bucket Trap since 2013
Thermodynamic Steam Trap
Thermodynamic steam trap with inbuilt strainer and full stainless steel construction, best suited for header and mainline drains and drop legs.
Inverted Bucket Trap
Inverted Bucket Trap
Typical Applications: High Pressure indoor steam main drips & submerged heating coils.
Compact Steam Trap Station
Compact Steam Trapping Assembly for main lines as well as for Steam Tracing Lines
At present, in any process plant, where ever steam is involved & it has to be transported from Boiler (Point of Steam Generation) to the equipment (Point of usage), it has to get distributed through headers & run through main lines. While traveling through the main lines, due to radiation heat loss, condensation of the steam takes place, which has to be drained out at definite intervals. Thermodynamic Steam traps are used at the drip legs of these main lines to trap the steam & remove / drain out the condensate. Certain steam trap assembly is used to remove this condensate & keep the plant alive without affecting the process, which is called as condensate drain trap module.
We are leading Manufacturer & Service Provider for the Pipeline Accessories which also includes Glandless Piston Valve & Air Vent/Air Eliminators Filters since 2013
Glandless Piston Valve
The FM Piston valve is a seat less & gland less Piston Valve. At the heart of the FM piston valve are Piston & sealing rings.
Air Vent/Air Eliminators Filters
Air Vent/Air Eliminators Filters
Automatic air vents are designed for use on hot and cold water installations.
One Spirax Strainer upstream of every trap, control valve, and flowmeter can save you a bundle in annual maintenance and wear & tear costs. Available in Y or T type designs, our Strainers remove suspended grit from steam and condensate that would otherwise damage your downstream equipments with no additional pressure drop.
Moisture in steam blocks heat transfer. In compressed air, it fouls your application. Spirax separators are a simple and effective way to improve both your processes.
Disc Check Valves
Recommended for use after traps discharging into closed systems to guarantee against return or spill back.
Safety valve model SV 11 is a high lift safety valve with gun metal seat, valve and body and brass internals suitable for use on steam, air and water.
Filters VRS Control Panel
The model VRS Control Panel provides a fully automatic filtration system to operate all functions of the motorized rotary filter product line eliminating manual labour and possible human error.
Our Diffuser is a compact unit designed to be fitted to the outlet of a steam or air trap discharging to atmosphere. The Diffuser reduces the problems of noise and erosion by dampening high velocity discharge. It can be fitted to any trap where conditions promote blast discharge similar to that associated with balanced pressure, inverted bucket or thermodynamic traps.
The VB 14 is a small purpose designed vacuum breaker for general purpose applications on condensing vapour(steam) or liquid systems.
Steam Traps For Process Equipment
We are leading Manufacturer & Service Provider for the Steam Traps for Process Equipment which also includes Automatic Pumping Trap (APT) & Utility Automation Module since 2013
Automatic Pumping Trap (APT)
Automatic Pumping Trap (APT)
World’s smallest condensate removal system for stalling condition.
Utility Automation Module
Utility Automation Module
Recovering pure condensate form Multi Utility Reactors
Float Traps is the best choice for process applications. The only ball float steam trap with over 50 years of experience and constant development
The Forbes Marshall Ball Float Trap (FT) is the product of experience. First launched in the 1940’s the F 1 has become the most advanced ball float steam trap available. Constant design improvements have “ace today’s FT an extremely robust steal trap.ideally suited to the ngorous demands of any steam system. Unique amongst all pail float steam traps is the self alogning main valve, water hammer proof float assembly and corrosion resistant air vent Such attention to detail ensures complete shut-off at all pressures and reliable operations which lead to an extended product life and minimal maintenance. Having an integral thermostatic air vent and options of a steam Sock release (SIR) and drain cock tapping, the FT range is adaptable to all applications where ball float traps are recommended and instantaneous removal of condensate is required.
Steam Trap Performance Monitoring System
We are leading Manufacturer & Service Provider for the Steam Trap Performance Monitoring System which also includes Wireless Steam Trapping & Sight Glasses since 2013
Wireless Steam Trapping
Move away from conventional trap monitorings systems. Adopt the latest innovation.
Systems for enhancing the utilisation of steam in different applications.
Temperature Control Systems
We are leading Manufacturer & Service Provider for the Temperature Control Systems which also includes Temperature Control & Self Acting Temperature Control Valve since 2013
Temperature control through steam flow control for extremely accurate results.
Self Acting Temperature Control Valve
It is designed with a long enough sensor to ensure accurate sensing (and not localized sensing) and thereby provide better accuracy especially in large tanks, reactors, vessels etc.
Compact On-off Valve
Our PAV is a robust, compact valve having body, tight shut off is guaranteed by using a PTFE plug seal, valve stem sealing is provided by self aligning PTFE chevrons for maximum sealing integrity.
PID Based Tempeartuer Control System
D’tron series PID Controller from Forbes Marshall is the most advanced in its class with freely selectable I/O, capability to perform high-end function like Ratio, Over Ride, Transfer, Average and Control.
Krohne Flow Meters
Krohne Flow Meters
Offer Active Since: 20 Jul, 2011
krohne is a world leader in flow and level applications, with worldwide manufacturing, research and calibration facilities. We offer extensive range of krohne flowmeters, level and density instruments. We offer aquaflux electromagnetic flowmeters, aquamag magnetic flowmeters, ultrasonic flowmeters, optimass flowmeters, vortex flowmeters and optiwave & optiflex level measuring instruments.
Stainless Steel Indicator Housing Flowmeter
Offer Active Since: 23 Jun, 2010
For particularly rough environmental conditions, the M9 indicator housing is optionally available in stainless steel.
This guarantees its reliable use in corrosive atmospheres caused by operational immissions. When installed outdoors, external influences such as salt fog or contaminated precipitation no longer lead to corrosion. The stainless steel housing is equally well-suited for use in splash water zones such as in the food and luxury food industry.
At KROHNE, it is the modular design on the one hand and the flexible production structure on the other that form the basis for application and customer-related special variants
From universal to one-of-a-kind: The H250 variable area flowmeters from KROHNE have the entire range of requirements in the process industry covered.
Electromagnetic Flow Meters
Offer Active Since: 10 Feb, 2012
* Measuring instruments for Water and waste water.
* Established in 1984, a JV of Forbes Marshall and KROHNE Messtechnik Gmbh & Co. KG, Germany.
* Most modern calibration rig in India which is also the second largest in Asia and is accredited by NABL.
* Manufactures and supplies more than 12000 flow meters every year to the Indian market.
Electromagnetic Flow Meter
We are leading Supplier & Manufacturer for the Electromagnetic Flow Meter which also includes Electromagnetic Flow Meters Optiflux 7300 C & Electromagnetic Flow Meters Optiflux 1000 Sensor since 2005
Electromagnetic Flow Meters Optiflux 7300 C
The measuring tube’s rectangular cross section generates an extremely homogenous magnetic field, which allows bidirectional measurements independent of the flow profile
No filters or rectifiers required
Negligible pressure loss of < 10 mbar
Measurements subject to custody transfer from 40 l/h (e.g. nighttime flows) up to 3.000 m³/h (e.g. fire brigade loads)
Non-wearing and maintenance-free thanks to RILSAN®-lined measuring tube without moving measuring inserts
Very low installation and operating costs
Also suitable for subsurface installation and battery operation
Electromagnetic Flow Meters Optiflux 1000 Sensor
Basic and fully functional flow sensor
Excellent price performance ratio
Quick and easy to install and operate
The OPTIFLUX 1000 electromagnetic flow sensor is the economic and ecological solution for various industries, ranging from agriculture to utilities and from fire fighting to machinery.
The instrument is economical due to low investment and maintenance costs; it is ecological due to accurate measurements and no waste.
Electromagnetic Flow Meters Optiflux 2000 Sensor
Engineered and manufactured for the water and wastewater industry
Wide range of approvals for potable water
Long-term reliability and negligible maintenance
The OPTIFLUX 2000 electromagnetic flow sensor is the optimum solution for water and wastewater applications.
Its long-term reliability and durability make it the standard flow sensor for the water industry for measuring abstraction water, drinking water, wastewater, sewage and effluent.
Electromagnetic Flow Meters Optiflux 4000 Sensor
Standard flow sensor for the process industry
For demanding applications: High temperatures, low conductivity, hazardous areas
Robust and reliable
The OPTIFLUX 4000 electromagnetic flow sensor is the standard in the process industry and suitable even for demanding applications.
Electromagnetic Flow Meters Optiflux 5000 Sensor
Exceptional long-term stability and accuracy
For highly aggressive and abrasive fluids
Fully vacuum-resistant with high-tech ceramics liner
The OPTIFLUX 5000 is one of the most accurate flowmeters available in the market today.
This is the result of a special tube design with conical parts, optimizing the flow profile. Leading metrological institutes use the OPTIFLUX 5000 as their master meter.
Electromagnetic Flow Meters Ifc 050 Signal Converter
For water and wastewater applications
Multiple outputs, incl. active pulse output and RS485 Modbus
Excellent price/performance ratio
The IFC 050 was especially designed for measurements in different types of water processes. The signal converter can be used for virtually all water processes from raw water to drinking water.
The signal converter IFC 050 in combination with the flow sensors is a perfect choice for measuring conductive fluids. The output represents measured values for flow, mass and conductivity.
Electromagnetic Flow Meters Ifc 300 Signal Converter
Diagnostics: Process and device diagnostics, accuracy check
One signal converter for all applications
Exceeds requirements of VDI / VDE 2650 and NAMUR NE 107
The electromagnetic signal converter IFC 300 is designed to measure the flow velocity, conductivity, volume and mass flow of electrically conductive liquid media.
The signal converter can be combined with any measuring sensor, making it very widely used. In terms of available housing versions, there is a compact variant, in which the signal converter is connected to the measuring sensor, as well as the field, wall-mounted and 19″ rack-mounted housing.
The electronics plug-in module is identical, regardless of the housing version, providing the same functionality and a standardized operating concept.
Electromagnetic Flow Meters Optiflux 4040 C 2 Wire Emf
2-wire connection without additional cabling
As dynamic, reliable and accurate as a 4-wire EMF
Unimpeded pipe cross-section
No additional pressure loss
Minimum conductivity 5 μS/cm
Intrinsically safe connection
OPTIFLUX 4040 C is an electromagnetic flowmeter in 2-wire technology with the dynamics, reliability and accuracy of a 4-wire EMF.
OPTIFLUX 4040 C is suitable for steady or pulsating flows.
Electromagnetic Flow Meters Tidalflux 2300 F
Measurement in partially filled pipes up to DN1600 / 64″
Patented, non-contact level measurement
Measurement possible down to 10% filling of pipe
Sensor and converter available in Ex zone 1
The TIDALFLUX 2000 flow sensor with integrated and non-contact capacitive level measuring system provides accurate flow measurement in partially filled pipes.
TIDALFLUX is designed to measure reliably between 10% and 100% of the pipe cross section. The integrated level sensors in the liner are in no contact with the liquid and are therefore insensitive against fat and oil floating on the surface.
Electromagnetic Flow Meters Optiflux 6000 Sensor
Robust stainless steel housing for hygienic and aseptic operation
Fully suitable for CIP and SIP
Typical food & beverage and pharmaceutical process connections and insertion lengths
The OPTIFLUX 6000 electromagnetic flow sensor is specifically designed to stay clean and sterile in compliance with the most stringent demands prevailing in the food & beverages and pharmaceutical industries.
There are no crevices, gaps or blind spots and the flow sensor offers full CIP/SIP possibilities. The flow sensor is conform FDA regulations for all wetted materials and is certified in accordance with EHEDG and 3A.
The OPTIFLUX 6000 provides simple engineering, installation and commissioning. The flowmeter is available as a separate or compact version. Therefore the flow sensor can be installed in places difficult to access due to for example high temperatures or vibrations. The converter is also available in a stainless steel housing for applications when for example regular cleaning procedures with aggressive cleaning agents, may attack a standard polyurethane coating.
In addition to weld-end connections, the OPTIFLUX 6000 offers a large number of other hygienic connections, including DIN 11851, DIN 11864, clamp and SMS. Because of its high accuracy, a precise measurement of the medium is possible enabling an accurate calculation of flows whether it is required for blending, dosing or batching. Furthermore, losses can be reduced to a minimum. It remains its accuracy in case of pulsating flows. And also when a medium has a low conductivity for example in case of glucose or fruit concentrates, the OPTIFLUX 6000 delivers an optimal performance.
Area Flow Meters
We are leading Supplier & Manufacturer for the Area Flow Meters which also includes Variable Area Flow Meters H250 M9 & Variable Area Flow Meters H250 M40 since 2005
Variable Area Flow Meters H250 M9
The standard solution for the process industry. H250 flowmeters based on the float principle are versatile and can be used for conductive and non-conducting liquids and gases. The sturdy all-metal design ensures high resistance to pressure, temperature and media and stands up to extreme application and environmental conditions. The position of the float is magnetically transmitted to an analog indicator to display the measurement without auxiliary power.
Variable Area Flow Meters H250 M40
The new standard solution for the process industry. The H250/M40 flowmeters are setting a new standard in variable area flowmeter technology. They combine tried and tested flow measurement with latest communication capabilities like Foundation Fieldbus.
The functionality of the devices is modular extendable. The innovative construction allows a free choice of intrinsically safe or flameproof design.
The sturdy all-metal design, availabale in different materials, ensures high resistance to pressure, temperature and media and stands up to extreme application and environmental conditions. The new H250/M40 is the new standard solution for the process industry when costs and reliability are a factor.
Variable Area Flow Meters H250 M8
The compact solution for the process industry. H250 flow meters based on the float principle are versatile and can be used for conductive and non-conducting liquids and gases. The sturdy all-metal design ensures high resistance to pressure, temperature and media and stands up to extreme application and environmental conditions.
Variable Area Flow Meters H250 M10
The ideal solution for the process industry. The H250 flowmeters based on the float principle are versatile and can be used for conductive and non-conducting liquids and gases. The sturdy all-metal design ensures high resistance to pressure, temperature and media and stands up to extreme application and environmental conditions. The position of the float is determined without contact or hysteresis, using magnetic field sensors and is displayed on the digital indicator.
Variable Area Flow Meters Dk 37
The DK 37 variable area flowmeters can either be equipped with a mechanical or electronic indicator and are suitable for measuring gases and liquids.
They are sturdy, versatile all-metal measuring devices. All devices are fitted with a metering valve to accurately set the flow value.
Its suitability for measuring the flow of gases in accordance with the DVGW G260 process sheet has been certified by the DVGW testing station at the Gas-Fired Thermal Energy Institute in Essen/Germany.
Variable Area Flow Meters H250 Food Or Pharmaceutical
The H250 Food flowmeter is a further development of the tried and tested all-metal instrument and was especially designed for use in the food and pharmaceutical industry. It is used to measure liquids, gases and saturated steam. It features a hygienic surface with a surface finish of Ra < 0.8 µm as well as a design free of dead spaces.
The only EHEDG-certified variable area flowmeter approved for the food and pharmaceutical industry features smooth stainless steel surfaces with a surface roughness of the parts in contact with the medium of < 0.8 µm, which makes it difficult for deposits
to stick and easy to clean.
Variable Area Flow Meters H250 Specials
Variable area flowmeters-generally feature a vertically positioned measuring cone through which the medium flows from bottom to top, raising a float against the weight.
If the installation structure does not permit it otherwise, the versions H250H for horizontal or H250U for reverse installation position (from top to bottom) are used. The reset force lacking in the weight of the float is replaced by a tongue.
Variable Area Flow Meters Dk 32 Or Dk 34
The DK 32 and DK 34 variable area flowmeters are versatile and can be used for gases and liquids.
The sturdy all-metal design ensures high resistance to pressure, temperature and media and stands up to extreme application and environmental conditions.
The position of the float is magnetically transmitted to an analog indicator to display the measured value. No power supply is necessary.
Variable Area Flow Meters Va 40
The standardized device design is available with various connections that conform to standards. The glass measuring cone, protected by a metal sleeve with a viewing glass, makes it easy to read the flow directly and observe the medium.
The suitability for measuring the flow of gases in accordance with the DVGW G260 process sheet has been certified by the DVGW testing station at the Gas-Fired Thermal Institute in Essen.
Variable Area Flow Meters Va 45
The VA 45 variable area flow meters were designed to measure gases. They can be used, for example, in industrial ovens, forges and furnaces, and protective gas and heating systems. The standardized device design is available with various connections that conform to standards.
The glass measuring cone, protected by a metal sleeve with a viewing glass, makes it easy to read the flow directly.
Variable Area Flow Meters
We are leading Supplier & Manufacturer for the Variable Area Flow Meters which also includes Variable Area Flow Meter Ga 24 & Variable Area Flow Meter Dk 46 Or 47 Or 48 Or 800 since 2005
Variable Area Flow Meter Ga 24
The GA 24 variable area flow meters are suitable for the measurement of liquids and gases.
The stable steel plate housing features a large viewing window for direct reading of the flow and observation of the medium.
The scale with flow units attached to the housing can be replaced. The stainless steel flanges can be lined with PTFE.
Variable Area Flow Meter Dk 46 Or 47 Or 48 Or 800
The DK 46, DK 47, DK 48 and DK 800 variable area flowmeters feature glass cones of varying lengths for different accuracy requirements.
The medium is visible and the flow value of the gas or liquid can be read directly off the scale at the height of the float.
It is easy to change the measuring glass, which is protected by a plastic cover, without disassembling the fitting.
For precise setting of the flow value, all devices are equipped with a metering valve.
Variable Area Flow Meter Dk 700
The DK 700 variable area flow meters with finely adjustable needle valves were specifically designed for use in analysis applications. The devices can also be easily built into panels.
A special valve construction enables dosing of extremely small flow volumes with an almost linear control characteristic.
Variable Area Flow Meters K20
Plastic variable area flowmeter
Direct flow indicator
No electrical auxiliary power
Universal screw and glue connections
High-quality plastic measuring tubes
For liquid and gas flows
Electric limit switch
Mass Flow Meters Mfc 300 Modular Converter
Modular signal converter concept and the same hardware for all housing designs
Double redundancy of the calibration data
Stainless steel housing for applications in the food, beverage and offshore industry
The MFC 300 is a universal Coriolis mass flow signal converter suitable for a wide range of applications and installations. The common platform for the modular hardware allows easy selection for the required output options, and is suitable for mounting in various housing configurations.
The MFC 300 is also suitable for all current and future mass flow sensors. The split architecture solution for the mass flow family ensures maximum security and redundant back-up of calibration parameters, should a failure occur. There is no need for reprogramming after a failed unit is replaced.
Variable Area Flow Meters Krovasys
ROVASYS 4 is the new Selection and Calculation tool for variable area flow meters. It offers the 2 modules KROVASEL and KROVACAL.
Using KROVASEL makes the determination of an approriate instrument for given process parameters very simple. The integrated media data base supports the completion of missing physical properties of the medium. Simultaneously to the sizing the suitability of the instrument is verified.
Variable Area Flow Meters Pressure Regulators
Differential pressure regulators are used in particular when measuring gases in order to ensure constant flow rates in the case of fluctuating inlet or outlet pressure..
Minimum pressure levels are necessary to operate the regulators. Differential pressure regulators are not pressure reducing valves. The regulators are available in brass or stainless steel.
Flow Measuring Instruments
We are leading Supplier & Manufacturer for the Flow Measuring Instruments which also includes Electromagnetic Flow Meters Ifc 100 Signal Converter & Electromagnetic Flow Meters Waterflux 3070 Water Meter since 2005
Electromagnetic Flow Meters Ifc 100 Signal Converter
Simple and easy to install
Diagnostics of device and application
Extremely fast signal conversion
The IFC 100 electromagnetic signal converter is designed to measure the flow velocity, conductivity, volume and mass flow of electrically conductive, liquid media.
The signal converter can be combined with any measuring sensor, making it very widely used. In terms of available housing versions, there is a compact variant, in which the signal converter is connected to the measuring sensor, as well as a 0° and 45° version.
If the measuring point is difficult to access or the ambient conditions prevent the use of the compact variant, the signal converter is available in a wall-mounted housing.
The IFC 100 was designed for applications requiring an economical measuring solution with a high level of technology.
Electromagnetic Flow Meters Waterflux 3070 Water Meter
Battery driven with very low power consumption for remote locations
Easy installation without straight inlet or outlet lengths
IP 68 rated signal converter for submersion in flooded chambers
The IFC 070 is a battery powered electromagnetic signal converter designed for use in combination with the WATERFLUX 3000 sensor. It is ideal for remote locations in the water industry where no power connection is available and provides certainty in case of power failure.
The strengths of the WATERFLUX 3070 lies in its unique flow sensor construction with a rectangular and reduced cross section and its efficient coil construction.
The coils provide a stronger and more homogenous magnetic field, leading to an improved signal to noise ratio. The measurement is therefore independent of the flow profile and measurements are very stable. This results in a very good low flow performance.
Electromagnetic Flow Meters Batchflux 5500 C
High-stability zirconium oxide measuring tube
Extreme long-term stability
Most compact and lightweight design in the market
BATCHFLUX 5500 C is the industrial standard for volumetric filling machines.
Its zirconium oxide liner guarantees extreme long-term dimensional stability and therefore no change in repeatability of filling volumes over long periods of time.
The BATCHFLUX 5500 C is the successor to the BATCHFLUX 5015 C. The BATCHFLUX 5500 C offers some major improvements for the most commenly use sizes: DN10 and DN15. It has a better versatility of applications with a much better performance in difficult applications like fibrous products, hot filling and CIP / SIP processes.
Another improvement is that KROHNE has been able to further reduce the dimensions and weight of the flowmeter. It now fits in tighter spaces. The weight of filling machines can be reduced and energy savings are possible.
Mass Flow Meters
We are leading Supplier & Manufacturer for the Mass Flow Meters which also includes Mass Flow Meters Optimass 1000 & Mass Flow Meters Optimass 2000 since 2005
Mass Flow Meters Optimass 1000
First choice for universal applications
Best price-performance ratio
A wide range of options available with no restrictions
The OPTIMASS 1000 is the cost effective solution for accurate measurement for a variety of applications.
The OPTIMASS 1000 reliably measures massflow, density, volume, temperature, volume concentration or solid content.
Mass Flow Meters Optimass 2000
Large diameter for bulk measurement and custody transfer of liquids and gases
Stainless Steel measuring tubes (NACE Compliant)
Super Duplex option offering a maximum operating pressure of 180 barg
Whilst the OPTIMASS 2000 has been developed to meet the demanding custody transfer requirements of the oil and gas industry, it is well suited to bulk measurement in many applications. The option of Super Duplex (UNS S32750) provides a maximum operating pressure of 180 barg.
A high level of performance makes the OPTIMASS 2000 suitable for the bulk measurement of petroleum and oil as well as products like syrup, molasses and raw chemicals.
Combined with the power of the MFC 300, the OPTIMASS 2000 will provide accurate measurement of volume, mass; density and concentration.
Mass Flow Meters Optimass 3000
First choice for low flow applications
Certified secondary pressure containment
A common footprint for all three sizes, in Hastelloy ® or Stainless Steel
The OPTIMASS 3000 is the cost effective solution for accurate measurement in a variety of applications, where there is a low process flow. Combined with the power of the MFC 300, the OPTIMASS 3000 will provide accurate measurement of mass, volume, density and concentration.
Mass Flow Meters Optigas 5010 C
Two sizes: S 15 (50 kg/min flow)
or S 25 (120 kg/min)
Signal converter (transmitter)
or MODBUS Direct Data
Communication DDC outputs
High accuracy and wide
Compact and low cost
Easy to install and commission
Developed in conjunction with
Mass Flow Meters Optimass 6000
The high performance meter for process industries
Cryogenic, high temperature and high pressure options
Supreme liquid and gas performance with CT approval
A high level of performance, together with a wide operating temperature range up to 400°C / 752°F, makes the OPTIMASS 6000 the ideal choice for mass flow measurement in a wide variety of applications.
Designed to meet the requirements of general purpose liquid and gas applications, the extended low temperature range of -200°C / -328°F also makes the 6000 suitable for Liquid Natural Gas (LNG) and cryogenic applications.
Combined with the power of the MFC 400, the OPTIMASS 6000 will provide accurate measurement of volume, mass, density and concentration.
Mass Flow Meters Optimass 7000
The optimum meter for demanding applications
A single straight measuring tube
Choice of 4 tube materials
The OPTIMASS 7000 is the only sensor for mass flow with a single straight measuring tube that is available in Titanium, Stainless Steel, Hastelloy® or Tantalum.
Mass Flow Meters Optimass 8000 K
For gas and liquid applications up to 230ºC
Cryogenic and LNG applications down to -195°C / -319°F
Designed to meet NAMUR installation lengths
A high level of performance, together with a wide operating temperature range up to 230°C, makes the OPTIMASS 8000k the ideal choice for mass flow measurement in a wide variety of applications.
Designed to meet the requirements of general purpose liquid and gas applications, the extended low temperature range of -195°C / -319°F also makes the 8000k suitable for Liquid Natural Gas (LNG) and cryogenic applications.
Combined with the power of the MFC 300, the OPTIMASS 8000k will provide accurate measurement of volume, mass, density and concentration.
Mass Flow Meters Optibatch 4011 C
Reliable batching repeatability
Excellent low flow stability
Hygienic design for food, beverage and pharmaceutical applications
The OPTIBATCH has been developed to compliment the OPTIMASS family of mass flowmeters, as a specialised meter for batching and filling machines.
As part of the Coriolis family of meters, the OPTIBATCH offers excellent long-term stability and reliability of mass flow, over long periods.
Mass Flow Meters Mfc 010 C Converter
Modbus communication direct from meter; no need for separate converter
Connection using standard, off-the-shelf, four-core cable
Cost effective solution since no converter needed
Applicable for Ex and non-Ex installation
Full functionality through using Modbus communication:
– all measured variables
– ability to program meter
– sensor and process diagnostics
Full range of OPTIMASS sensor types and OPTIGAS
Full range of sensor materials, connections and options available
Mass Flow Meters Mfc 400 Modular Converter
High performance signal converter for all applications
Synthesised drive for excellent operation in multi-phase applications
Advanced diagnostic functions acc. to NAMUR NE 107
The new MFC 400 mass flow signal converter from KROHNE is perfectly suited to all measuring tasks offering high performance with air entrainment, excellent zero stability and advanced density measurement.
It offers seven measuring functions in one device: mass flow rate, mass counter, density, temperature, volume flow rate, volume counter and concentration of fluids, including alcohol concentration.
The MFC 400 is fitted with an extensive diagnostics package providing condition based monitoring. It is insensitive to gas entrainment and can be provided with a stainless steel housing. Currently compatible with the OPTIMASS 6000 the MFC 400 will subsequently be available for all OPTIMASS mass flowmeters.
Ultrasonic Flow Meters
We are leading Supplier & Manufacturer for the Ultrasonic Flow Meters which also includes Ultrasonic Flow Meters Altosonic Iii & Ultrasonic Flow Meters Optisonic 7300 since 2005
Ultrasonic Flow Meters Altosonic Iii
Excellent long-term stability and high reliabilty
Non-intrusive, no moving parts; no pressure loss, no wear
Compliant with OIML R-117 and API
KROHNE’s ALTOSONIC III offers decisive advantage over conventional, mechanical flowmeters in custody transfer metering applications. The absence of obstructions in the pipe and moving parts results in no wear and no pressure loss.
The benefits this brings are maintenance free operation and simplified meter run configuration (smaller pump capacity, no filters required). This results in considerable cost savings in both capital expenditure (CAPEX) and operation expenditure (OPEX).
Ultrasonic Flow Meters Optisonic 7300
The OPTISONIC 7300 offers an ultrasonic measurement system dedicated for process gas flow applications. The OPTISONIC 7300 does not have the limitations that are usually associated with traditional gas flow meters like periodical recalibrations, maintenance, pressure loss and a limited flow range.
The OPTISONIC 7300 combines the advantages of ultrasonic measurement in a way that it is efficient, reliable and easy to use.
Ultrasonic Flow Meters Optisonic 6300 P
User friendly operation through full colour graphic display and full keypad
Quick and easy transfer of logged data to your PC through USB interface
Sensors: robust, fast installation, high performance
The new OPTISONIC 6300 P flowmeter combines mobile, straightforward and quick liquid measurement with the proven precision and reliability of KROHNE ultrasonic technology. Simply attach the sensor unit to the tube and connect the compact evaluation unit – now just read the results. It is just as easy to use the device for data logging. Data is saved to a USB stick and transferred to external evaluation systems.
Its ease of use and flexibility make the OPTISONIC 6300 P the ideal solution for flow measurement in a variety of applications in virtually any sector of industry.
Ultrasonic Flow Meters Ufm 3030
Independant of conductivity, viscosity, temperature, density and pressure
No moving or intruding parts, therefore no pressure loss or wear
Minimal operational and maintenance costs
UFM 3030 is a 3-beam ultrasonic flowmeter for liquids. UFM 3030 measures independent of conductivity, viscosity, temperature, density and pressure.
Ultrasonic Flow Meters Ufm 530 Ht
Accurate, repeatable and long-lasting performance
Efficient bundle waveguide technology
Flow measurement even under harsh process conditions
UFM 530 HT is a dual beam ultrasonic flow meter for crudes and a broad range of refined products, that are processed under extreme conditions (high temperature / high pressure). Also for accurate flow measurement of synthetic heat transfer oil at extreme high temperatures (500 °C) and rapidly changing temperatures, the UFM 530 HT offers a unique solution.
The UFM 530 HT with its robust industrial construction performs with minimum operational – and maintenance costs, due to a solid fully welded construction without any moving parts and hence no wear.
Ultrasonic Flow Meters Altosonic V
Custody transfer accuracy and repeatibility
Excellent long-term stability and high reliability
Wide viscosity range, from LPG to heavy crudes
No on-site calibration required
KROHNE’s ALTOSONIC V has established itself as the standard in multibeam custody transfer flowmetering. The absence of obstructions or moving parts in the pipe, ensures no wear or pressure loss. This, in combination with larger meter sizes permits simplified configuration of metering systems. For example no strainers and less parallel lines are required.
Operation is maintenance free. No periodic calibration is required, drastically cutting cost for on-site equipment and procedures. This all results in considerable cost savings in both capital (CAPEX) and operation expenditure (OPEX).
Ultrasonic Flow Meters Optisonic 6300
The OPTISONIC 6300 stands for continuity and long term reliability. Flow measurement can be done anywhere and start-up is immediate.
The OPTISONIC 6300 clamp-on flowmeter for liquids with its robust industrial construction and regreasing concept provides a revolutionary solution for easy handling. It can be fitted on the outside of piping to measure the flow rate of liquids.
The clamp-on flowmeter is a combination of one up to two OPTISONIC 6000 clamp-on sensor(s) and one UFC 300 ultrasonic signal converter. The overall functionality of the clamp-on flowmeter is the continuous measurement of actual volume flow, mass flow, flow speed, velocity of sound, gain, SNR and diagnosis value.
Ultrasonic Flow Meters Altosonic V12
As times change, so do the requirements for ultrasonic meters. Today it is assumed that an ultrasonic device measures accurately and precisely, but what about long-term reliability? After all, this depends on more than just the ultrasonic meter itself. The transferred effect of the high pressure calibration on the installation conditions in the measuring station and dirt, which may collect on the meter over time, can also have a negative effect.
The unique chord arrangement of the ALTOSONIC V12 enables it to generate diagnostic data for places where traditional ultrasonic meters gathered too little information or none at all: firstly at the pipe wall itself, scanning with reflection. Secondly, in close proximity to the pipe wall, using the geometrical arrangement of the outer chords. Thirdly, at the bottom of the pipe. This data is gathered using a separate diagnostic chord. This extremely extensive diagnostic data allows the ALTOSONIC V12 to carry out self-monitoring, which sets the standard for other devices in terms of performance monitoring.
Ultrasonic Flow Meters Ufm 800 W Weld In Or Ufm 800 C
Weld-in sensors for metal pipelines (W, also with Hot Tapping)
Built-on or built-in sensors for open channels (C)
No constriction of the pipe cross-section
No additional pressure drop
Electrical conductivity, pressure, density, etc.
have no effect on measurements
Easy to install from outside or inside
Low power consumption
Low operating costs
We are leading Supplier & Manufacturer for the Vortex Flowmeters which also includes Vortex Flow Meter Optiswirl 4070 since 2005
Vortex Flow Meter Optiswirl 4070
Integrated pressure and temperature compensation
Temperature compensation for saturated steam included as standard
All OPTISWIRL versions in 2-wire technology
The OPTISWIRL 4070 C is the first vortex flowmeter to feature integrated pressure and temperature compensation in 2-wire technology.
The OPTISWIRL 4070 C provides reliable measurement of operating, standard volumetric and mass flow of conductive and nonconductive liquids, gases and vapours, even with fluctuating pressures and temperatures.