Norgren

 

norgren

 

 

 

 

 

 

 

BLUE-SLICE TOOLING

 

BLUE-SLICE TOOLING

 

Blueslice cad
Norgren Automation Solutions Blue-Slice nesting tooling system provides a completely configurable product tailored specifically to your needs. The Blue-Slice is compatible with existing lower tooling “trees” while providing an increase in productivity.

Key Features

Faster Setup – The operator needs only two trips to the cart per station to move the blue slices to the bar instead of 3-4 trips for old fashion tooling

Easier Setup – The slices are held together in order, so the operator can place them where they need to go faster and easier

Coded Locations – Each blade is coded so they can’t be placed in the wrong locations. This will reduce setup time and crashes due to misplaced tooling

An End to Lost Tooling – Because all the blades are held together, lost tooling is much less likely, a problem that happens often with current tooling

Advanced Ergonomics – The carriers are simple to lift and load as opposed to old fashioned tooling, which could be large and difficult to handle

Limited Floor Space? – Because the blades are smaller, a new cart design will be able to hold twice as much tooling, allowing cart usage to be cut in half

 

 

GC4 GRIPPER

 

 

GC4_large

 

 

GC4 large
Features

40mm Cylinder Bore
Modular configuration
Rotary gripper head for unlimited adjustment
Flange and orbital rod mounts
Field changeable jaw openings
Field changeable single or double point tips
Fixed or adjustable tip inserts
Optional edge guards
Optional side plate proximity sensing
Optional magnetic reed cylinder sensing
Multiple head type options

Technical Data

Fluid: Compressed air
Minimum Air pressure: 2.76 bar (40 psi)
Maximum Air pressure: 8 bar (116 psi)
Operating temperature: -4°C (25°F) to 77°C (170°F)
Air consumption: 32mm: 1.37in.3 or 22.52cm3
Air filtration: 40 Micron

 

 

 

 

SERIES IOT SWIVEL ARMS

 

 

SERIES IOT SWIVEL ARMS
Vacuum cup and accessory mounting arm

Compatible with most brands of venturi or vacuum cup mounting devices

Infinite length and rotational position adjustment over the available adjustment range

For compatible accessories, please see series TL and TP Vacuum Cup Mount / Venturi

 

 

 

RADIAL CAM

 

 

Picture4_188x184

 

The Radial Cam from Norgren Automation Solutions provides a new direction in metal forming.

Eliminates by-pass flanging for geometry in same plane motions
Contacts class-A surfaces completely at initial contact
Improves panel quality, less scrap in production
Reduces die tryout times
Adjust timing easily in the tryout press
No machining required for timing adjustments
Smaller die footprint
Less maintenance in production
Makes a longer flange at notch
Built in CAD model

Leave a Comment

Your email address will not be published. Required fields are marked *