Valves

Valves

We are the importers of all kinds of Industrial valves.

 

solenoid_valve

 

Valves

 

You will get Pressure transducer, Pressure Sensor,Pressure Switches, Temperature Gauge, Pressure Gauge for Atlas Copco, Chicago Pneumatic, Crepelle, Thome Crepelle, ABC Air & Industrial Gas Compressor:

For Model: HX/HN Compressor Range,
P series Compressor Range
PB/TCB/TU/Fe Compressor Range
ZD Compressor Range
DX/DN Compressor Range
DM Compressor Range
CU/CT/CN/CS Compressor Range
FBR/BBR/VIP Compressor Range
B&D Compressor Range
We can offer you all critical spares of OEM quality and standards. We stand for its unconditional guarantee for material manufacturing defects and performance which will be at Par with OEM supplies of Atlas Copco, Chicago Pneumatic, Crepelle, Thome Crepelle, ABC Air & Industrial Gas Compressor spares
All manufacturer’s names, numbers, symbols and description are used for reference purpose only and it is not implied that any part listed is the product of these manufacturers.

 

 

Pneumatic Valve

Inter Cooler

Most industrial compressors operating today are a multistage design. To optimize the cost of compressing air/gases it is popular to use multi-stage industrial compressor. When the Air compressor compresses air, heat is generated this causes the air to expand requiring an increase of horsepower for further air compression. If we remove the heat generated by compressing air, the total horsepower required for addition air compression is reduced up to 15%. For a multi stage compressor is to cool the gas between compression stages. Thus the role of the compressor intercooler is to provide colder, dryer, denser air to the next stage of compression. In addition to inter stage coolers, the compressor’s final discharge is usually routed through an after cooler, which also provides colder and dryer gas to the end use point.
We provide Intercooler to suit compressor mounting by maintaining critical nozzle distance, as well as side mountings with volume bottles to avoid pulsation.
You will get Intercooler, After cooler and Oil Cooler for Atlas Copco, Chicago Pneumatic, Crepelle, Thome Crepelle, and ABC Air & Industrial Gas Compressor:
For Model: HX/HN Compressor Range,
Aftercooler

Water or moisture is not desirable in the transmission lines of an air compression system. Water carried through the lines washes away lubricating oil from the tools the compressed air is running. This causes the tools to operate sluggishly & increases the need for maintenance. The effect is compounded in high speed tools, where wearing surfaces are limited in size & excessive wear reduces efficiency by creating air leakage.

Further problem results from the decrease of temperature caused by sudden expansion of air at the end. This low temperature creates condensation, which freezes around port and valves & impairs efficiency. These conditions can be minimized by removing the moisture from the air directly after compression, before the air enters the distribution system.

The compressed air discharged from compressor is hot. Compressed air at these temperatures contains large quantities of water in vapor form. As the compressed air cools this water vapor condenses into a liquid form. As an example if an after cooler is not used, a 200 scfm compressor operating at 100 psig introduces 45 gallons of water into the compressed air system each day.
You will get Aftercooler, Intercooler, and Oil Cooler for Atlas Copco, Chicago Pneumatic, Crepelle, Thome Crepelle, and ABC Air & Industrial Gas Compressor:
For Model: HX/HN Compressor Range,
Non Return Valves

In process engineering systems, sudden flow reversals after compressors and in connecting pipe
Works pose considerable risks for the system, compressors and personnel.
Offer effective protection against this risk. Critical pulsations and strong fluctuations in flow conditions after controlled compressors are a particular challenge for check valves. This means the check valves have to adapt to the prevailing pulsations, turbulences and changes in inflow conditions and close quickly and reliably upon sudden flow reversal. Based on many years’ experience in the field of valve technology, it has developed the right solution for just such critical applications.
Even in strongly pulsating flow environments and under varying operating conditions, this check valve is reliable, safe and efficient.
This check valves have proven to be the right solution in countless applications with compressors
Refineries
Petrochemical industry
Chemical industry
Natural gas industry
Industrial air systems
PET production in piping all industries
Safety Valve
Safety ValveClick to Zoom
We can offer Safety Valves (POP Type) that are widely used in pressure systems to control flow of gas or liquid. When the temperature or pressure within the vessel or pipeline exceeds the permissible limits, our valves automatically release liquid or gas. In addition to this, our products can be customized as per the specifications detailed by the customers.
Features:
· High capacity, low blow down
· Air, gas, steam & liquid
· Save energy
· “0” leak valve
Application:
· Air / gas compressors reciprocating or rotary
· A team boilers & generators
· Pressure vessels including tanks, receivers, sterilizers and autoclaves
We also offer a wide range of High Pressure Safety Valve.

Specifications:
· Size: 1/2″ x 2″ to 2″ x 2″
· Set Pressure: 5Bar to 100Bar
· MOC:-
o Body: WCB (Gr.216)
o Trim: SS304/SS316
· Application: Air, Gas, Steam
· Also comes with handle/Lever
Pressure Transducer

You will get Pressure transducer, Pressure sensor, Pressure Switches, Pressure Gauges, Temperature Gauges for Atlas Copco, Chicago Pneumatic, Crepelle, Thome Crepelle, ABC Air & Industrial Gas Compressor:
For Model: HX/HN Compressor Range,
Solenoid Valve
Solenoid ValveClick to Zoom
Solenoid valve is integral part of Electro. This valve will control the supply of air to inlet or valve in load/unload operation of reciprocating. Different types of solenoid are available in market. In Compressor Technology Normally open (N/O) or Normally Close (N/C) type solenoid valve are used to perform loading/unloading action.

 

Solenoid valve has three ports, these are

(1) Inlet
(2) Outlet
(3) Exhaust.
Use of each port is as below
01) Inlet Port
Impulse air supply through tube of Dia. not less than 12 mm from the air receiver through control filter connected to inlet port of solenoid valve
02) Outlet Port
This port is also known as port. This is connected through, at least 6 mm Dia. Copper or Nylon tube to inlet (Suction) valve of the compressor.
03) Exhaust Port
This port is for the escape of trapped air in the line. It should always keep open to the atmosphere.
Details of Normal Open & Normal Close Solenoid Valve.
A) Normal Open (N/O)
This type solenoid valve allows air supply to flow from inlet port to outlet (cylinder ) port, in de-energized or normal condition. When energised, due to change over in pressure contact stops the air supply. This type of solenoid valve are used for load/unload operation of air compressor.
B) Normal Close (N/C)
This type of solenoid valve does not allow air supply from inlet port to outlet port in de-energized or normal condition. When energized due to change over in contact of pressure switch allows air supply to flow through cylinder port. This type of solenoid valve is used in 5-step control panel for increasing and decreasing the area of clearance pocket during unloading/loading operation of Air Compressor.

 

We offers Pulse Solenoid Valve that utilizes diaphragm valves to pass compressed air from the air supply lines and manifold into the blow piped within the bag filter. Solenoid Valves are available in ¾” to 2” suitable for 24V DC &110V/230V AC for catering various needs of the customers. These Dusting Pulse Solenoid Valves are usually actuated with electrically operated pilot solenoids. We are known for our quality and with this we have gained reputation as one of the eminent Pulse Air Solenoid Valve Manufacturers, based in India.

 

Pulse Valve Controller

Pulse Valve Controller
Product Descriptions:
Pulse valve controller is the main control equipment in the dust cleaning system of pulse jet dust collector. Its output signals control the solenoid valves, which spray
and inject compressed air to clear dust from the filter elements in sequence.

The controller output pulse interval and pulse width are set according to the dust cleaning requirement of the dust collector to ensure that the system resistance remains within the set range.

Working Conditions & Technical Data:
Rated Input Voltage: AC200~240V, 50HZ-60HZ
Rated Output Voltage: DC24V
Rated Output Current: 1A
Power Consumption: 8W (Pulse width and interval are within the specified range)
Adjusting Range of Output Pulse Interval: 1~30 Sec
Adjusting Range of Output Pulse Width: 0.03~0.2 Sec/li>
Input Signal of Pressure Differential: Switch contact
Working Environment: -25 55 Relative humidity ≤ 85%; No serious corrosive gas or conducting dust; No violent shock or impact
Terms Explanations:
PULSE WIDTH: the duration of an electrical signal output sent by the controller
PULSE INTERVAL: the time interval between two signals sent by the controller
PULSE CYCLE: the time needed for the electrical signal output sent by the controller to complete.

Pulse Valve & Controller

Diaphragm and solenoid valves work together for efficient operation of the dust collector cleaning system. They are the “switch” for compressed air in the dust clean blowing system. Controlled by the output signals of the pulse jet controller, they make dust clean to the filters by filters to keep the pressure drop of dust collector within the set range and thus guarantee the filtering functions and the efficiency of dust collector
Pulse valve controller is the main control equipment in the dust cleaning system of pulse jet dust collector. Its output signals control the solenoid valves, which spray and inject compressed air to clear dust from the filter elements in sequence.
adjusting range of output pulse width: 0. 03~0. 2 sec/li>
working environment: -25~+55, relative humidity ≤ 85%; no serious corrosive gas or conducting dust; no violent shock or impact
pulse width: the duration of an electrical signal output sent by the controller
pulse interval: the time interval between two signals sent by the controller
pulse cycle: the time needed for the electrical signal output sent by the controller to complete.

 

 

Directional Valves

We have emerged as a prominent importer and supplier of Directional Valves. These products are specially designed in order to meet the demands of various industries. Our range of products offered by us includes the following :
Directional Solenoid Valves
Download
Directional Solenoid ValvesHot Product
Item Code: DSG-03-DC
We provide wide range of Solenoid Operated Directional Valves with Valve Size of 03 (3/8″) and DC Coil Type
High Flow rate upto 120 lpm (31.7 USgpm)
Maximum Operating pressure upto 315 bar (4500 PSI)
Long service life with average durability of 50 million spool shifts
Pilot Operated Directional Valves
Item Code: DHG-04
Pilot Operated Directional Valves with the valve size of 1/2″ (04). These Directional Control Valves are available with following features.
High Flow rate upto 300 lpm (79.3 USgpm)
Long service life with average durability of 50 million spool shifts.
Item Code: DHG-10
We provide Pilot Operated Directional Valves with a valve size of 1″-1/4″.
High Flow rate upto 1100 lpm (291 USgpm)
Solenoid Operated Directional Valves
Item Code: DSG-01-AC
We offer our client an excellent quality range of Solenoid Operated Directional Valves, which are manufactured from high grade quality raw materials. These Directional Control Valves are available in the Valves Size of 1/8″ and AC coil type.

High Flow rate upto 63 lpm (16.6 USgpm)
Maximum Operating presuure upto 315 bar (4500 PSI)
Large View

Solenoid Controlled Pilot Operated Directional Valves
Item Code: DSHG-04
Solenoid Controlled Pilot Operated Directional Valves with a valve Size of 1/2″. These Pilot Operated Directional Valves are made up of high quality raw material and available with following features.
Item Code: DSG-01-DC
We provide a wide range of Solenoid Operated Directional Valves (DSG-01-DC) with a valve size of 01 (1/8″) and DC coil type.

 

 

Item Code: DSG-03-AC
We provide a wide range of Solenoid Operated Directional Valves (DSG-03-AC) with a valve size of 03 (3/8″) and AC coil type.
Pilot Operated Directional Control Valves
Item Code: DHG-06
We provide a Pilot Operated Directional Valves DHG-06 with a valve size of 3/4″. These Directional Control Valves are available with the following features.
High Flow Rate upto 500 lpm (79.3 USgpm)

 

Item Code: DSHG-06
We manufacture and supply Solenoid Controlled Pilot Operated Directional Valves DSHG-06 with a valve size of 3/4″ (04).
Item Code: DSHG-10
We provide a wide range of Solenoid Controlled Pilot Operated Directional Valves DSHG-10 with a valve size of 1-1/4″ (10).

 

Send Enquir

Leave a Comment

Your email address will not be published. Required fields are marked *