Vega

Vega

head_02

Products

We are leading Manufacturer & Service Provider for the Products which also includes Rolling Mill & Rubber And PVC Calendaring Lines since 2008
Rolling Mill

Rolling%20Mill
Chain Transfer Rolling Mill

Rubber And PVC Calendaring Lines

Three roll/ four roll calendar machine controls complete synchronization of the calendaring line, in case of PVC about 14 stations with turret winder control anti-accident controls such as roll reversals on emergency conditions precision synchronization.

Single And Multiple Gear Roll Testing Machines

SPM for testing Automobile gears Fully automatic operation to improve testing efficiency LVDT based deviation sensing. High accuracy Comparison with master for relative error finding Complete profile of the gear is saved and displayed on line Statistical functions for data analysis.

Smart Interfaces

Tension Controllers Position Loop Controllers, Two wire communication interfaces RS 485 and CAN bus interfaces.

Strategic Tie Ups

Vega has tied up with experienced Process Experts in various fields such as steel, paper, cement to understand process requirements and complexities.

Twin Roll Rewinders And Rewinders

High speed operation cross curve speed characteristic for tension control unwinder tension control using regenerative drives add to power saving automatic loading and unloading control

System Integration

ABB Low Voltage AC Drives, ABB Medium Voltage AC Drives, ABB Digital DC Drives, ABB Automation Products ,ABB SCADA Portal.

System Integration Drives

Thyristor Controlled DC Drives upto 500 HP Thyristor Controlled Heater Controllers upto 1000 kw.

Coating Plants

Complete synchronized control of sectional coating plant automatic tension control of winder and unwinder precision control by using load cells otherwise diameter based control turret winder mechanism and sequence control.

Paper Coating Plants
Transmission Testing Machines

Regenerative Loading for testing machine for accurate control and power saving Custom built software to generate required record Interface with existing ERP or SAP systems possible Complete automatic cycle Data log storage.

Two / Three Roll Strip Mill

Fully synchronized and inter-stand tension controlled mill the roll gap or size setting is automatic through HMI interface of contact less thickness sensing device to regulate the roll gap.

Super Enameled Copper Wire Plants

High speed wire enameling plants motion control automatic tension control speed synchronization of winder and traversing motor to maintain exact pitch as per KOPT ratio PID based temperature and valve controls of catalytic converter ovens.

High Speed Wire Drawing Machines

Dynamic wire drawing machine controls up to 50 m/sec automatic tension control through a special winder for the wires up to 4 microns higher core to barrel ratio winding resulting in extra productivity contactless tension sensors for feedback are used overriding PLC system to control the operation.

Paper Making Machinery Automation Sectional Drive

Load Sharing between Forward Roll and Suction couch Dandy Roll synchronization Progressive Draw control with Group or individual mode as well as forward or backward control selection Calendar and Pope reel tension control Integration facility with Pulp Process Control, QCS systems.

Reheating Furnaces For Bending And Tempering

78 PID Controlled Temperature zones Glass Positioning within 3 mm in the Furnace Bending Profile Control using X-Y axis control Automatic Cycle control

Slitters

High speed operation through synchronized and tension controlled motors automatic tension control of winder and unwinder precision control by using load cells otherwise diameter based control.

Over Ball Diameter Testing Machines

Over Ball Diameter testing Dual LVDT based system for differential testing Custom built SCADA for maximum data Storage, saving and recalling facilities of the old data

Plasma Welding Machine

Profile control through AC/DC servo motors used in X-Y-Z axis HMM based profile programming Interface of CAD Drawings possible Welding Torch Control Automatic sequencing control.

Rotocure Machines

Belt tracking mechanism automatic winder tension control pneumatic/hydraulic controls sequencing control PID controlled temperature control.

Rotogravure And Flexo Printing

Complete synchronized control of unwinder, in feed, main delivery motor, out feed and winder PLC based total automation system including temperature control, speed control, and tension control automatic tension control of winder and unwinder.

Cooling Bed Dividing Shear

Cooling%20Bed%20Dividing%20Shear

Lt Panels (Ltp-01)

Lt%20Panels%20%28Ltp-01%29

Lt Panels (Ltp-02)

Lt%20Panels%20%28Ltp-02%29

Lt Panels (Ltp-03)

Lt%20Panels%20%28Ltp-03%29

Also Deals In

Low Voltage Ac Drives
Position Loop Controllers
Rubber
System Integration Range
Tension Controllers
Thyristor Controlled Dc Drives
Thyristor Controlled Heater Controllers
Two Roll Strip Mill

CNC Vertical Machining Centers
We are leading Retailer & Service Provider for the CNC Vertical Machining Centers which also includes Chandra+ & Gaurav CNC Vertical Machining Centers since 2004
Chandra+

Chandra%2B
Table (mm): 315 x 1,060
Stroke X/ Y/ Z (mm): 800/ 350/ 380
Power (cont./ int.) (kW): 3.7/ 5.5
Spindle RPM: 6,000
Taper: BT 40
Feed rate (mm/min): 1-5,000

Gaurav CNC Vertical Machining Centers

Gaurav%20CNC%20Vertical%20Machining%20Centers
Table (mm): 350 x 600
Stroke X/ Y/ Z (mm): 450/ 350/ 350
Power (cont./ int.) (kW): 3.7/ 5.5 (5.5/7.5)
Spindle RPM: 8,000 (10,000, 12,000)
Feed rate (mm/min): 1-10,000

Sirius

Table (mm): 450 x 900
Stroke X/ Y/ Z (mm): 600/ 450/ 500
Power (cont./ int.) (kW): 5.5/ 7.5
Spindle RPM: 8,000

Agni++

Agni%2B%2B
Table (mm): 450 x 1,000
Stroke X/ Y/ Z (mm): 800/ 450/ 500
Power (cont./ int.) (kW): 5.5/ 7.5 (7.5/ 11)

Vayu

Table (mm): 510 x 1,000
Stroke X/ Y/ Z (mm): 800/ 510/ 510
Power (cont./ int.) (kW): 7.5/ 11 (11/ 15)
Spindle RPM: 8,000 (10,000)

Dhruva
Chakra

Table (mm): 600 x 1,250
Stroke X/ Y/ Z (mm): 1,050/ 610/ 610
Spindle RPM: 6,000 (8,000/ 10,000)
Taper: BT 40, BT50

Sooraj

Table (mm): 600 x 1,500Stroke X/ Y/ Z (mm): 1,280/ 700/ 650Power (cont./ int.) (kW): 7.5/ 11 (11/ 15)Spindle RPM: 8,000 (6,000/ 10,000)Taper: BT 40/ BT50Feed rate (mm/min): 1-10,000

Astra

Table (mm): 600 x 1,500
Stroke X/ Y/ Z (mm): 1,280/ 700/ 650
Spindle RPM: 8,000 (6,000/ 10,000)
Taper: BT 40/ BT50
Feed rate (mm/min):

Vajra

Table (mm): 810 x 2,400
Stroke X/ Y/ Z (mm): 2,000/ 810/ 810
Power (cont./ int.) (kW): 15/ 18.5 (18.5/ 22)
Taper: BT 40/ BT 50

Virat

Table (mm): 350 x 500
Stroke X/ Y/ Z (mm): 500/ 350/ 350
Power (cont./ int.) (kW): 5.5/ 8.25
Taper:

Tejas

Table (mm): 500 x 850Stroke X/ Y/ Z (mm): 650/ 510/ 450Power (cont./ int.) (kW): 11.7/ 16.7Spindle RPM: 15,000/ 20,000Taper: HSK A 63/BT 40Feed rate (mm/min): 1-48,000

CNC Horizontal Machining Centers
We are leading Retailer & Service Provider for the CNC Horizontal Machining Centers which also includes Tej & Maxpro H400E – H440E since 2004
Tej

Pallet (mm): 400 x 400 to 500 x 500
Stroke X/ Y/ Z (mm): 560/ 410/ 460 to 700/ 560/ 560
Power (cont./ int.) (kW): 7.5/ 11 (15/ 18.5)
Spindle RPM: 6,000 (8,000, 4,000, 10,000, 4,500)
Taper: BT 40, BT 50

Maxpro H400E – H440E

Maxpro%20H400E%20-%20H440E

Uttam

Pallet (mm): 500 X 500
Stroke X/ Y/ Z (mm): 800/ 800/ 800
Power (cont./ int.) (kW): 25/ 30
Spindle RPM: 10,000

Maxpro H650 – H750

Maxpro%20H650%20-%20H750
Pallet (mm): 630 x 630 (800 x 630)
Stroke X/ Y/ Z (mm): 900/ 750/ 630 to 1,200/ 750/ 700
Power (cont./ int.) (kW): 22/ 26
Taper: 7/14 taper#50
Feed rate (mm/min): 1-10,000 (1-15,000)

Vega

Table (mm): 400 x 400
Stroke X/ Y/ Z (mm): 510/ 510/ 510
Power (cont./ int.) (kW): 7.5/ 11
Spindle RPM: 10,000 (12,000, 8,000)
Taper: HSK – A63
Feed rate (m/min): 20

CNC Vertical Lathes
We are leading Retailer & Service Provider for the CNC Vertical Lathes which also includes Sudarshan BVL 550H & Sudarshan BVL 800 since 2004
Sudarshan BVL 550H

Sudarshan%20BVL%20550H
Standard Turning Diameter (mm): 600
Maximum Turning Length (mm): 350
Power (cont./ int.) (kW): 18.5/ 22

Sudarshan BVL 800

Sudarshan%20BVL%20800

Sudarshan BVL 1200

Sudarshan%20BVL%201200
Standard Turning Diameter (mm): 800
Maximum Turning Length (mm): 800
Power (cont./ int.) (kW): 37/ 45

Knee Type Milling Machines
We are leading Retailer & Service Provider for the Knee Type Milling Machines which also includes HF series milling machines & UF series milling machines since 2004
HF Series Milling Machines

HF%20series%20milling%20machines
Table (mm): 1,245 x 230 to 2,055 x 355
Stroke X/ Y/ Z (mm): 590/ 270/ 390 to 1,230/ 350/ 470
Power (kW): 3 to 11

UF Series Milling Machines

UF%20series%20milling%20machines
Table (mm): 1,175 x 230 to 2,055 x 315
Stroke X/ Y/ Z (mm): 590/ 270/ 340 to 1,030/ 350/ 420

Other Products
Matec Products

Matec%20Products
matec builds some of the most powerful and productive CNC travelling column machining centres, gantry machines and mill-turn centres. Situated in Köngen in Germany, matec Maschinenbau GmbH is a subsidiary of Bharat Fritz Werner Limited. Details on matec can be obtained.

CNC 5-axis Vertical Machining Center

CNC%205-axis%20Vertical%20Machining%20Center
Table (mm): 500 x 1,000
Stroke X/ Y/ Z (mm):
1,300/ 460/ 450
-30° to + 45°

CNC 5-axis Horizontal Machining Center

CNC%205-axis%20Horizontal%20Machining%20Center

CNC Double Column Vertical Machining Center

CNC%20Double%20Column%20Vertical%20Machining%20Center
Table (mm): 1,250 x 2,000 – 2,000 x 3,000
Stroke X/ Y/ Z (mm): 2,200/ 1,400/ 750 – 3,200/ 2,200/ 750
Taper: BT 50
Feed rate (m/min): 15/ 15/ 12

Crankshaft Pin Milling Machine

Crankshaft%20Pin%20Milling%20Machine

CNC Vertical Milling Machines

CNC%20Vertical%20Milling%20Machines

Special Purpose Machines

Special%20Purpose%20Machines
Spindles
Spinner Products

Laser

Our core-business is the production of high quality laser for cutting, drilling and engraving.
We project entirely our machines and we equip them with high performance sources: solid state Nd:Yag sources, Fiber Ytterbium sources, End Pumped with fiber diode sources and CO2 sources. The applications of our lasers are almost unlimited.

The VEGA series units are engraving laser systems complete with a 2-axis galvanometer scan head, equipped with a solid state diode pumped Nd:YAG laser source (from 5 to 150 watt), or FIBER YTTERBIUM source, or END PUMPED source with fiber diode.
They are used mainly in applications for engraving/ etching, and cut such materials as: painted glass, black granite, aluminium, metals, plastics, etc…
The main feature that marks the VEGA series is the extraordinary quality of laser sources, which allows results without compromises.
The VEGA laser is formed by a mobile console containing all the control electronics, the cooling system and the operator interface PC and by a large reclining table on which is placed the laser head connected to the console through flexible connections. This connection allows applications nearly unlimited.

Pegaso Compact

Pegaso%20Compact
The laser machines of the Pegaso Compact series are systems with a 2-axis of galvanometer scan head, equipped with a solid state diode pumped Nd:YAG laser source (from 5 to 150 watt), or FIBER YTTERBIUM source, or END PUMPED source with fiber diode. They are used mainly in engraving/etching and cutting materials as: painted glass, black granite, aluminium, metals, plastics, etc.
The main feature of the Pegaso Compact series is the extraordinary quality of laser sources, which produces extraordinary results. All is included in a compact machine of smart design.
The work area is studied in order to offer to the operator the best comfort. This feature united with the ease of use, high quality, speed and flexibility makes Pegaso Compact very handy. There is a wide range of materials, of low and medium thickness, on which a combined processing of cutting,drilling and engraving can be made.

Fi-Berg Plus

Fi-Berg%20Plus
The lasers of FI-BERG PLUS series are equipped with a galvanometer scan head with FIBER YTTERBIUM source. Thanks to the compact design this machine is perfect for every kind of space. However, the working area is wide enough to contain different servo-devices. The source power might vary from 5 to 30 watts: this feature allows a wide range of different processing, especially on metallic materials.

Fi-Berg

The lasers of FI-BERG series are equipped with a galvanometer scan head with FIBER YTTERBIUM source. Thanks to the compact design and the small dimensions, this machine is perfect for every kind of space. The source power might be from 5 to 30 watts: this feature allows a wide range of different processing, especially on metallic materials.

Prometeo

Laser system for engraving, cutting and drilling
Specifically designed to be fitted on every button machine.
The POLARIS series units are engraving laser system complete with a 2 axis galvanometer scan head, equipped with a sealed CO2 laser source (from 10 to 300 Watts), and used in applications for engraving, cutting and drilling such materials as plastics, wood, corozo (vegetal ivory), leather and all natural materials, paper/cardboard, polyester, anodised or painted metals, glass, marble, granite, ceramic, mother of pearl, bone, cloth in general, etc.
Quick and easy to install, it takes up little room because it stands vertical.

Perseo

Laser system for cutting and engraving at 2 Cartesian XY axis. Mechanical structure at mobile bridge and an adjustable floor in Z with a mobile conveyor. It is equipped with laser sources Co2 of a sealed up type from 50 to 300 warr. Applications: cut and/or engrave of materials in plate7sheets, semi manufactured goods or finished products such as: methacrylate, plastic, acetate, polyester, woods, paper, leather, organic materials, synthetic. Modality of work excution in vectorial and/or raster with cut head through a scan head (optional). The system provides a high execution quality, reability, speed, application flexibility and executive immediacy.
The perseo system rises for industrial applications particularly busy, where the conventional machines couldn’t work.

Pegaso Plus

Pegaso%20Plus
The laser of the PEGASO PLUS series units are engraving laser complete systems with a 2-axis of galvanometer scan head, equipped with a solid state diode pumped Nd: YAG laser source (from 5 to 150 watt), or FIBER YTTERBIUM source, or END PUMPED source with fiber diode. They are used mainly in applications for engraving/ etching, and cut such materials as: painted glass, black granite, aluminium, metals, plastics, etc…
The main feature that marks the PEGASO PLUS series is the extraordinary quality of laser sources, which allow results without compromises; all is included in a big size machine body that is able to contain pieces of big sizes.
Thanks to its strength the PEGASO PLUS system is particularly suitable for industrial applications and easy applications; it is possible to integrate a special monolithic structure that makes PEGASO PLUS a real and own machine tool.
The work area is studied in order to offer to the operator the best comfort. This feature united with the ease of use, high quality, speed and flexibility makes Pegaso Plus very handy. There is a wide range of materials, of low and medium thickness, on which a combined processing of cutting,drilling and engraving can be made.

Laser Devices

To complete our offer we have many additional devices: a complete range of accessories realized in order to increase the precision of engravings, accelerate the system, automate the entire production cycle.
XY Table Nd Yag

XY%20Table%20Nd%20Yag
A programmable X-Y Cartesian coordinates system to shift a piece holder table. It works in complete autonomy.
It is a highly efficient servo device, that can be fitted to most object to be engraved, carved, or cut. Possibility to
have different sizes, starting from 250 x 250 mm.
Ideal for the Nd:Yag lasers.

CNC Lathe

CNC%20Lathe
A device to realize circular engravings. A tailstock mounted on a runner in anodized aluminium is available as an option for long or heavy pieces.
It has a self-centering chuck, 80 mm diameter, with grippers for inside and outside.
Product Details Categories: Laser Devices
Rotary Devices Technical info: Download pdf

Swinging C-Axis

Swinging%20C-Axis
SWINGING C-AXIS is a device to engrave round shaped objects. This unit has an additional swinging axis to engrave conical surfaces, hollow objects or rings.

Belt

A rotative belt servo device with indexing, for accurate positioning of piece holder tools.
It allows the automatic release of the piece, leaving to the operator the only duty of ergonomic and safe loading.
Semiautomatic Loaders Technical info: Download pdf

Unwinder

A servo device that produces labels or engraves special ribbons.
Product Details Categories: Labels
Laser Devices Technical info: Download pdf

Co2 Vision System

Co2%20Vision%20System
CO2 VISION SYSTEM is a coaxial system that makes possible for the laser to automatically center objects of every shape in order to engrave them in theright position.
This device automatically detects the shape and the position of the object with no error possibility.
It is possible to use this unit together with the XY Table in order to create a production line with no need for operator.
Semiautomatic Loaders
Vision Systems

XY Table For Co2 Lasers

XY%20Table%20for%20Co2%20lasers

Tally
Tally One

Tally%20One

One Shot

One%20shot
Button-making Machines
Our long experience in the button market gave us the opportunity to create innovative machines to realize and finish buttons and fashion accessories. Our machines make automatically a quality selection.
Sirio

The SIRIO series units are engraving laser system complete with a 2 axis galvanometer scan head, equipped with a solid-state diode pumped Nd:YAG (from 5 toa 150 Watt) and used in applications for engraving, cutting and drilling such materials as plastics, painted glass, black granite, aluminium, metals ecc.
Thanks to its ease of use, high quality, speed and flexibility, it offers unique possibilities of application. Increasing the number of low/medium thickness material on wich combined processings can be made, both cutting/drilling and engraving.
Product Details Categories: Button-making Machines
Laser en
Metals
Nd:Yag
Plastics

4 Motion Compact

4%20Motion%20Compact
Semiautomatic revolving table system with 4 positions (loading, centring, engraving, discharge) with an integrated laser system.
4 MOTION has got 4 positions with specific self-centering collets for the buttons hold (10 -120 lineage), round objects and costume jewellery articles. It is easy and speedy to use, ideal for small and medium quantity, and it can
be equipped with laser CO2 or YAG. The Touchscreen interface allows checking the machine and gives useful information concerning the productivity and the working times.
In combining it is possible to have the vision system EAGLE which allows the centring of the pieces.
It is possible to provide 4 MOTION of special equipments which allow the loading of irregular shape objects. Besides it is possible to have special sector collets which allow loading of particular shape objects.

Polo 1 Evo

Polo%201%20Evo
POLO1 EVO is a specific equipment for marking the face and the edge of buttons. The machine is entirely run by PLC program.
The PLC runs different devices: the feeding disk, the blow for the photocell, the button’s outflow, the rotation speed of the turret, the turbo, the collet swap and the edge marking unit. The head moves thanks to a rotating table with desmodromic control with a double roller that avoid any loose. An inverter switches on the engine.
POLO 1 EVO is furnished with a feeder plate whose tilt might be easily regulated, in order to any client’s need.
Besides the traditional front-lit system, the machine is provided with a back-lit system in order to solve any processing problem and to make easy to work on the button. The vision system is the well known and very appreciated EAGLE VISION SYSTEM.
The peculiar shape of the machine makes easy to drop out the “no good” buttons before they reach the marking position. This is an useful feature in order not to have to make the selection when the engraving process is finally ended. The collets guarantee a perfect and long lasting centering of the button, both during the engraving of the face and of the edge.

Roundly

Automatic machine for the side engraving of buttons and similar objects.
Objet feeding and choice of the face are made trough a conical cupvibrating feeder. Objects are pushed on by a linear vibrator. The machine is equipped with an Eagle Vision System, that allows to orientate objects with any types of holes or slots. No specific tools for gripping or dragging are needed. It is easy and fast to prepare and equip. The feeding is guided and monitored by a system of optical sensor that supervise the duct filling process.
It can be used with all of LASERBERG lasers as well as with existing lasers by other manufacturers, as long as they are preset for round engraving.

XY Table

XY%20Table
A freely programmable X-Y Cartesian co-ordinates system to shift a piece holder table.
It works in complete autonomy.
It is a highly efficient servo device, that can be fitted to most object to be engraved, carved, or cut. Possibility to have different sizes, starting from 250×250 mm
On request: suction surface, ideal for CO2 laser cutting

Poliberg

POLIBERG is a device for polygonal turning. It is entirely electronic and doesn’t need any belt. The motion can be in the same or in the contrary direction, to this purpose the unit doesn’t need any mechanical change.
POLIBERG unit is easy to use, so it is not necessary a qualified technician. Furthermore, it is very versatile and it is possible to change shapes quickly.
For this reason, POLIBERG is the perfect device to realize samples or small productions. It is possible to use POLIBERG unit on every existing button machine.

Roundly Unit

Roundly%20Unit
It is an accessory deliberately studied in order to make the engraving on the edge of the button.
This device must be installed directly on the buttons machines with one head. It is possible to orientate the engravings basing on the holes’ position captured by the Eagle vision system. In this way the engraving on the edge is made and it is in phase compared to the button holes.

Feeler

The FEELER unit is a profile detector. This device has a great benefit: it is very easy to use and very precise, indeed it is possible with it to detect the profiles with the highest precision.
An USB receptacle is used for data transfer, so, of course, FEELER unit can be connected to any PC.
Finally, this device is provided with a CAD program.
Product Details Categories: Additional Devices
Button-making Machines Technical info: Download pdf

Sharpener

SHARPENER is an unit with a double wheel to grind tools. With this device it is possible to rough off and define the object at the same time.
In order to make the machine fully operational, it is provided with a drop by drop grease nipple, equipped with a stainless steel drip tray. Finally, the device is provided with an useful removable.

Eagle Vision System

Eagle%20Vision%20System
An extremely powerful vision system for object recognition and in-phase engraving.
It has an adjustable, particularly effective luminous diodes illuminant that fits all objects, regardless from their shape and surface.

Burn Unit

Burn%20Unit
It is an accessory expressly conceived to make the spotted effect of the buttons. This device has been studied in order to be installed directly on buttons machines. Through a little die shaped embossed and heated at the right temperature you can impress the stain on the washer.

Pro Tools

Pro%20Tools

Round Sharp

Round%20sharp

Rotoberg Evo

Rotoberg%20Evo

Drilling Tools
Industrial Drilling Tools
Laser System
Laser Systems
Topography Laser System
We are leading Manufacturer for the Products which also includes AGL LED Lights & Corona LED Lights since 2014
AGL LED Lights

AGL%20LED%20Lights
Green Star LED roadway and area luminaries are designed to deliver superior optical performance with greater energy efficiency compared to conventional (HID) luminaire. Digital Photo Sensor in roadway luminary provides automatic dimming capabilities which reduces energy costs by automatically adjusting light output at dusk and dawn. The innovative, contemporary design blends into all forms of architecture and allows the luminaire to work both aesthetically and functionally in a multitude of settings and applications, including roadway, parking lots, circulation areas and high mast lighting.

Corona LED Lights

Corona%20LED%20Lights
Green Star LED luminaire is designed to meet customer requirement. Beyond substantial energy saving and reduced maintenance cost this luminaire delivers incredible efficiency as compared to traditional HID luminary. It uses high brightness Multi Chip LED technology to provide better illuminance. It features convinient mounting with easy installtion.It is the best alternative of traditional street lighting and solar lighting.

RGL LED Lights

RGL%20LED%20Lights
GreenStar LED roadway and area luminaries are designed to deliver superior optical performance with greater energy efficiency compared to conventional (HID) luminaire. Digital Photo Sensor in roadway luminary provides automatic dimming capabilities which reduces energy costs by automatically adjusting light output at dusk and dawn. The innovative, contemporary design blends into all forms of architecture and allows the luminaire to work both aesthetically and functionally in a multitude of settings and applications, including roadway, parking lots, circulation areas and high mast lighting.

Solaris LED Lights

Solaris%20LED%20Lights
The Solaris-XD fixture uses Lumileds Luxeon Rebel ES LEDs with customized optics to generate desired photometric distribution of the luminary. This luminary features the extraordinary characteristics of ultra-efficient LED, which provide high efficacy energy saving. LED Module in the luminary can be varied based on required illuminance. The Solaris-XD Luminary is efficiently designed to be used for canopies, cold storage, warehouses, high bay ceiling light, etc.

Vega LED Lights

Vega%20LED%20Lights
Green Star LED Vega is a versatile solution to many applications including wall wash lighting, facade, billboard, high mast lighting etc. . This luminary is equipped with high brightness Multi Chip LED technology to provide better luminance and significant energy saving as compared to traditional HID Luminaries.

Avenger LED Lights

Avenger%20LED%20Lights
Indoor Lighting
We are leading Distributor for the Indoor Lighting which also includes Rebell & Eye since 2013
Rebell

This successful pendant luminaire presented at Light+Building 2010 was specifically developed for high ceilings and open spaces. Its unique design with vertically perforated openings was inspired by the most famous global cathedral bells. This intelligent lighting solution allows for the distribution of both direct and indirect luminous flux. The luminaire is also manufactured in LED version. As well as the basic variant made in high-gloss and opalgloss finish, it is also available in other exclusive colours that match designer’s ideas and interior architect’s requirements.

Eye

Modul Eye brings for lighting unique system allowing motorized control of lighting flux distribution. Luminaire evokes an idea, idea of lighting future, which is stimulated by technical options and also by requirements of market. Modul Eye is known for its combination of several functions, furthermore it provides lighting with modern design.
An important quality of interior light in an office with rear diffusion reflectors is a natural lighting. It does not glare and improves the comfort of staying indoors. The light emanating from the LED sources and distributed using indirect reflection provides many advantages – the decisive one being the overall efficiency. Vega are lighting fixtures intended for ceiling recessed installation. The used LED technology offers a lot of options, such as a wide range of white tuning for office lighting.

Porrima

The LED Downlight with high-efficient reflectors and low power consumption fulfils most requirements of all customers. These lighting fixtures are very popular and usable in a variety of spaces because of their elegant design, which ranked this model in the Elite group of luminaires. In conjunction with LED technology it provides extensive light regulation options in the interior from dynamic lighting to flexible scene setting.

Poluks

An aesthetic architectural LED downlight, intended mainly for premises used for social events, is a built-in model capable of being a stylish interior component. Its original design of rotating lines gives a frame to a high light flux of CRI>80. The current technologies allow perfect control and creation of unique and dynamic environment and flexible light scenes. Longevity, power saving and a manufacturing process without the use of LED are just some of the displays of the eco-friendly approach of our company.
Outdoor Lighting
We are leading Distributor for the Outdoor Lighting which also includes Avant & Vario since 2013
Avant

The characteristic feature of this suspended luminaire is its cross-section in the shape of the first letter of the name Avant. Depending on your choice the light source can be either linear FDH lamps or LEDs, which provides for great adaptability and allows use in almost any type of interior, mostly retail, shops and office spaces. The luminaire has excellent technical properties and is easy to install using a suspension system or a wall mount. The frequently used combining of luminaires into long lines further enhances all its strengths.

Vario

Variability is the main strength of this LED modular track system. The adjustable system can meet various demands placed on lighting of high quality. It offers a comprehensive solution for lighting in retails, shops, galleries and office spaces. The system’s tracks can accommodate independent swivelling spotlight units and linear bodies with different types of parabolic grids allowing combination of direct and indirect light.

Terzo

This ceiling recessed lighting fixture follows a modern lighting philosophy called the Lighting Guide 7. One of its key principles is the focus on the amount of light hitting the ceiling and the walls creating good visual conditions in the office and a suitable working environment for the room occupants. The internal system of TERZO reflectors imitates the natural reflection of light from the skies downwards in the office. The ceiling thus becomes an active component and an architectural item of inhabited space.

Ray

This suspended luminaire represents an elegant and sophisticated lighting solution for office lighting allowing setting the light temperature. This luminaire simulates external light conditions in interior. One luminaire produces different light temperatures throughout the day copying the natural sunlight cycle – dynamic lighting. The changes can be made either electronically using a remote control or a timer switch, or using a daylight sensor.